Mechanical Speedometer with Indicator 140km/h

・60Φ
・White LED lighting
・With indicators (high beam, neutral, oil pressure, turn signal)
・140km/h
・For 12V battery vehicles only
・Analog ODO Meter
・Analog TRIP Meter
・Approximate installation time: 1.0h

・60Φ
・White LED lighting
・With indicators (high beam, neutral, oil pressure, turn signal)
・140km/h
・For 12V battery vehicles only
・Analog ODO Meter
・Analog TRIP Meter
・Approximate installation time: 1.0h

*An anti-vibration meter bracket is required for installation.
*The speedometer can be used basically with stock mechanical meters (vehicles that use a meter cable) of the "60km/h=1, 400rpm" standard that is commonly used with Japanese models.This product cannot be used for foreign vehicles with different meter standards and some old vehicles.
*Exclusive for 12V battery vehicles.This product does not work properly on battery-less vehicles and vehicles with 6V batteries (including models converted to 12V electrical).
*It is not completely waterproof.The glass surface may become cloudy due to temperature differences and humidity inside and outside the meter.
*Removing the stock gauges may result in the loss of use of various indicators.Please prepare separately if necessary.
*The meter cable is a consumable item.If the outer tube is cracked or damaged, moisture, oil, dust, etc. may enter the meter and cause a failure.When replacing a mechanical meter, be sure to check the meter cable at the same time and replace it with a new one if necessary.
*The speedometer and tachometer are different from each other due to the difference of the internal structure and the color of the dial, which causes the difference of the luminous state (especially at night).
*The wiring of the harness must be modified to suit the vehicle.Please prepare the crimp terminal etc. separately.
*There may be changes in product specifications due to the manufacturer's reasons.



When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.