Webike STOCK RECOMMENDATIONS - FAST SHIP
廠商在庫
ENDURANCE
Rear Rack with Pillion Grip
廠商在庫
DAYTONA
Multi Wing Carrier
廠商在庫
KIJIMA
Assist Carrier
FITMENT
[要點]
[Material] Steel
[Color] Black finish
[Size] Max. overall width: 470mm / approx. 120mm longer than the back edge of the seat
[Color] Black finish
[Size] Max. overall width: 470mm / approx. 120mm longer than the back edge of the seat
[商品描述]
[Material] Steel
[Color] Black finish
[Size] Max. overall width: 470mm / approx. 120mm longer than the back edge of the seat
[Color] Black finish
[Size] Max. overall width: 470mm / approx. 120mm longer than the back edge of the seat
[注意]
*Kijima ETC installation bracket (Kijima part number: 304-5175) and bag support (Kijima part no210-49701, Kijima part number: 210-49702).
*Kijima pillion grips (Kijima part number: 210-553) cannot be used together because they share the same mounting points.
*Support carrier designed to stabilize touring nets, soft seat bags when loading luggage, etc. on pillion seats.In order to load a 30L or 50L box, the mounting base must be extended at the rear of the carrier, and since the base extends far back from the bottom of the box, it is susceptible to strong vibrations and damage due to vibration, and the possibility of carrier rupture accidents is high. Therefore, please do not load the BOX.
*Luggage hooks are attached so that you can use a net or other means to secure your cargo.Please make sure that the load is firmly secured to prevent it from falling off before driving.
*Because of the individual differences of each bike, be sure to tighten the four bolts temporarily, then gradually tighten the bolts, and finally tighten the bolts fully.It is recommended to protect the bike with tape or to have more than one person working on it, because it is easy to damage the bike side if you work alone.
*Because of the large individual differences in bike assembly, the product may appear bent when installed, but this does not mean that the product is defective.Please note that this is not a guarantee.
*When installing the fixing bolt on the front of the carrier, the round plug provided with this product is attached by hitting it with a plastic hammer, etc. This is done due to the design of the product.Once you install the round bottle stopper, you will have to remove it by prying with a flat-blade screwdriver, etc. Please do not install the round bottle stopper if it is troublesome.
*GB350S, the youngest brother of the glorious GB series, is fully equipped with the latest modules and is the heaviest bike of its generation.After installing this assist carrier, it is tempting to move the rear of the bike with the same ease as the previous generation GB series, but since the bike weighs about 30kg more than it did back then, please be careful of loose bolts or damage to the carrier attachment points.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Kijima pillion grips (Kijima part number: 210-553) cannot be used together because they share the same mounting points.
*Support carrier designed to stabilize touring nets, soft seat bags when loading luggage, etc. on pillion seats.In order to load a 30L or 50L box, the mounting base must be extended at the rear of the carrier, and since the base extends far back from the bottom of the box, it is susceptible to strong vibrations and damage due to vibration, and the possibility of carrier rupture accidents is high. Therefore, please do not load the BOX.
*Luggage hooks are attached so that you can use a net or other means to secure your cargo.Please make sure that the load is firmly secured to prevent it from falling off before driving.
*Because of the individual differences of each bike, be sure to tighten the four bolts temporarily, then gradually tighten the bolts, and finally tighten the bolts fully.It is recommended to protect the bike with tape or to have more than one person working on it, because it is easy to damage the bike side if you work alone.
*Because of the large individual differences in bike assembly, the product may appear bent when installed, but this does not mean that the product is defective.Please note that this is not a guarantee.
*When installing the fixing bolt on the front of the carrier, the round plug provided with this product is attached by hitting it with a plastic hammer, etc. This is done due to the design of the product.Once you install the round bottle stopper, you will have to remove it by prying with a flat-blade screwdriver, etc. Please do not install the round bottle stopper if it is troublesome.
*GB350S, the youngest brother of the glorious GB series, is fully equipped with the latest modules and is the heaviest bike of its generation.After installing this assist carrier, it is tempting to move the rear of the bike with the same ease as the previous generation GB series, but since the bike weighs about 30kg more than it did back then, please be careful of loose bolts or damage to the carrier attachment points.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5