FFC-250-T Front Fork Cartridge Conventional-Forks VERSYS X 300 (17-)

☆Product images are for illustrative purposes only; please refer to the actual product received for color.☆ ★Please provide the following personal data in the 'Order Remarks': Weight / Passenger Weight / Load Weight / (Commuting or Racing) Usage. If no special remarks are provided, the product will be shipped with factory settings. ．Applicable Model: KAWASAKI VERSYS X 300 (17-)

FFC – 250 Series. ．Two-way Damping Adjustment (250T): The damping hardness can be adjusted according to the owner's needs with independent Rebound (Reb) and Compression (Com) adjustment. Combined with precisely calculated needle angles, it provides a wide range of damping force adjustment to meet the rider's specific damping requirements. ．AIR PRELOAD DEVICE / APD (250S): The air preload mechanism allows for quick setting of the required sag using constant pressure filling based on the owner's SAG requirements. ．Adjustable Spring Preload: Spring preload can be fine-tuned according to the owner's needs. Both ends of the front fork have preload knobs; one full turn equals 1mm, simplifying the setup and saving time. ．Synchronized Damping Adjustment DAMP. (250S): A quick damping adjustment method designed for models with single-damping inner tube designs. ．High-Sensitivity Wide-Range Piston: The high-sensitivity wide-range piston, combined with a smooth oil passage design and diverse torque variations of the large piston, provides the necessary damping force to properly attenuate simple harmonic motion during low, medium, and high-speed (wide-range) operation. ．Silicon-Chromium Steel Reinforced Spring: The spring is made of SAE9254 silicon-chromium steel, allowing for the production of lightweight springs with larger wire spacing. ．Lightweight Inner Tube Set: Extensive use of high-strength and lightweight aluminum alloy materials effectively reduces unsprung weight.

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

※ If personal data is not provided in the order remarks, the product will be shipped with factory settings. [Notes Before Ordering] Before ordering, please carefully confirm the color, size, and other information. Most products have lead times provided after ordering, so there may be situations where products are discontinued or require a long wait for shipment. If an order cannot be fulfilled due to manufacturer stock shortages or other factors, it will not be processed; no fees will be charged if the order is not established. Please note that manufacturers may unilaterally change specifications or exterior designs, which may result in differences between the packaging or product appearance and the images on the product page. If a manufacturer's unilateral change in design or specifications prevents the product from performing as expected at the time of order, please consult our customer service for further processing. Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, while the product itself remains intact and functional. [Return Policy] If you require return services, please apply in the return section; please keep the product appearance intact and sealed in its original packaging. Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible. For non-human damage defects, please apply for a return within 7 days of receiving the product. [Authenticity Guarantee] For products with an authenticity guarantee, if they are found to be suspected counterfeits and confirmed by court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.