Aluminum Ring Rear Swingarm Slider for APRILIA models

．Applicable models: APRILIA RSV4 FACTORY (08-15), RSV4R (09-15), SHIVER 750 (08-15), TUONO V4R (10-15)

Product Model: DI-RASR-AP-01
Product Name: Aluminum Ring Rear Swingarm Sliders

If a large motorcycle is involved in a tip-over, it often incurs significant repair costs. Especially at high speeds, if an accident occurs, excessive friction between the motorcycle and the ground can cause the vehicle to bounce off the ground, leading to a flip or more severe damage (i.e., the transition from a LOW-SIDE to a HIGH-SIDE common on tracks).
DIMOTIV rear wheel slider outer layer is made of POM (polyoxymethylene) as the main material,
featuring the following characteristics:
1. Shock absorption: Absorbs impact force during a tip-over, effectively protecting the motorcycle body.
2. High rigidity: Strong hardness and high wear resistance.
3. Low friction coefficient: Low friction coefficient can effectively reduce the probability of the motorcycle bouncing and flipping due to excessive friction.

This product is fixed to the rear swingarm using an aluminum alloy tensioner, without affecting the operation of the original swingarm and wheel rim. During a tip-over, the POM block rotates, thereby reducing friction.

Product colors: Black/Gold/Titanium

Product material:
6061-T6 aluminum-magnesium alloy: Silicon content 0.4%-0.8%; Copper content 0.15%-0.4%; Magnesium content 0.8%-1.2%; Chromium content 0.04%-0.35%; Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa), elongation is 8% or more for thickness less than 0.25 inches (6.4 mm). 10% for thickness greater than 0.25 inches (6.4 mm).

Surface treatment:
General anodizing: Anodizing treatment at the same specification as iPhones and tablets, with corrosion and UV resistance, weather resistance up to 60 hours. (Fading begins only after 60 hours of continuous exposure to 100eV UV light; natural sunlight UV intensity is about 3-10eV). Dacromet anti-rust treatment: Fixing screws use top-tier anti-rust treatment—Dacromet, an anti-corrosion coating made of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely used in top European motorcycle models.

Installation instructions:
1. Please confirm the left and right orientation of the product according to the 3D diagram on the back of the card.
2. Pass the aluminum alloy axle through the front wheel axle.
3. Lock the sliders on both sides to complete the installation.

Precautions:
If the POM or components are damaged, they can be purchased individually without needing to buy the entire set again.

Applicable models:
APRILIA
RSV4 FACTORY 08-16
RSV4 R 09-16
Shiver750 08-16
TUONO V4 R 10-16

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes before ordering】
Before ordering, please double-check the color, size, and other information you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long wait for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other factors, the order will not be established; no fees will be charged if the order is not established.
Please note that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or the product itself differing from the images on the product page.
If a manufacturer's unilateral change in product design or specifications prevents the product from performing as expected at the time of order, please consult our customer service for further processing.
Products go through multiple shipping processes from order to delivery, so packaging may be deformed or damaged during transit, while the product itself remains intact and functional.
【Return Policy】
If you require return services, please apply via the returns section; please keep the product appearance intact and pack it in the original packaging box.
Upon receiving your return application, we will dispatch a logistics provider to collect the item as soon as possible.
For returns due to non-human-induced defects, please apply within 7 days of receiving the product.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and are confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.