Handlebar End Short

[Size] Φ30
[Quantity] Right / Left 1 set
[Specifications] M5

[Size] Φ30
[Quantity] Right / Left 1 set
[Specifications] M5

*Typical models are listed here as a reference of manufacturers and models that match only the screw diameter.The above information may differ depending on the year, specification, and other factors.Please make sure to check the fitment on the actual vehicle.
*There may be a large gap between it and the handle grip.Adjust handle length and grip position.
*It may be necessary to adjust the gap or change the length of the attached bolt.If spacers are added, the mounting bolts must also be extended.
*In case of long inner weights, it may be necessary to adjust (cut) the length.(Depth 140mm or less)
*Be sure to adjust the gap so that it does not interfere with throttle operation.
*It is recommended to cut off the protruding part on the handle side as installing it on SUZUKI vehicles.
*M6 and M8 are the dimensions of the mounting screws and attached bolts on the handlebar side.If the length of the attached bolt does not match the length of the bolt, please prepare it separately.
*HONDA / YZF-R25 / Ninja650 2017 require removal of stock weights.
*No bolts are included for 005-BE*12** Φ12 (mounting holes).If the stock cannot be used, please prepare the bolt separately.
*For HONDA and other models, remove the stock weights and bar ends from the handlebar and install this product.
*When installing the product, provide the proper clearance so that it does not interfere with the gas pedal operation.
*Other colors and types may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.