Aluminum Ring Front Fork Slider for MT-07 (14-21)

．Applicable models: YAMAHA MT-07 (14-21)

Product Part Number: DI-FASR-YA-08
Product Name: Front Axle Slider - Aluminum Ring
If a heavy motorcycle unfortunately tips over, it often incurs huge repair costs. Especially at high speeds, if an accident occurs, excessive friction between the vehicle body and the ground can cause the vehicle to bounce off the ground, leading to rollovers and greater damage—what is often referred to on the track as (LOW-SIDE to HIGH-SIDE, where a simple sliding accident turns into a vehicle bouncing and rolling). The outer layer of the DIMOTIV front axle slider is made of POM (polyoxymethylene) as the main material.

If a heavy motorcycle unfortunately tips over, it often incurs huge repair costs. Especially at high speeds, if an accident occurs, excessive friction between the vehicle body and the ground can cause the vehicle to bounce off the ground, leading to rollovers and greater damage—what is often referred to on the track as (LOW-SIDE to HIGH-SIDE, where a simple sliding accident turns into a vehicle bouncing and rolling). The outer layer of the DIMOTIV front axle slider is made of POM (polyoxymethylene) as the main material, which has the following characteristics:
1. Shock Absorption: Absorbs impact force during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: A low friction coefficient can effectively reduce the chance of the vehicle body bouncing and flipping due to excessive friction.
This product uses an aluminum alloy spindle that passes through the hollow front wheel axle, which does not affect the operation of the original swingarm and wheel rim. When the slider is impacted, the force is transmitted through the aluminum alloy spindle to the other end, reducing the direct impact on the swingarm and wheel rim. During a tip-over, the POM block will rotate, thereby reducing friction.

Product Colors:
Black/Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%, Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), yield strength 35,000 psi (241 MPa). For plate thickness less than 0.25 inches (6.4 mm), elongation is 8% or more. For thickness greater than 0.25 inches (6.4 mm), elongation is 10%.

Surface Treatment:
General Anodizing: Anodizing process with the same specifications as iPhones and tablets, featuring corrosion resistance, UV resistance, and weather resistance for up to 60 hours. (Fading begins only after 60 hours of continuous exposure to UV intensity of 100eV; natural sunlight UV intensity is approximately 3~10eV). Dacromet Anti-Rust Treatment: The mounting screws use premium anti-rust treatment - Dacromet, a corrosion-resistant coating primarily composed of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet has a wide range of applications and is used by top European motorcycle brands for this anti-rust technology.

Installation Instructions:
1. Please confirm the left and right orientation of the product according to the 3D diagram on the back of the product card.
2. Pass the aluminum alloy spindle through the front wheel axle.
3. Lock the sliders on both sides to complete the installation.

Notes:
If the POM or components are damaged and unusable, they can be purchased separately without the need to buy the whole set again.

Applicable Models: (Please refer to the image for details)
YAMAHA
MT-07 14-21

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes before ordering】
Before ordering, please carefully confirm the color, size, and other information you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long wait for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other factors, it will not be processed; no fees will be charged if the order is not established.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or the product itself looking different from the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing its intended function, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in the packaging or the product itself remains intact and functional.
【Return Policy】
If you require a return service, please apply in the return section; please keep the product in its original condition and pack it securely in the original shipping box.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For non-human-induced defects, please apply for a return within 7 days of receiving the product.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and proven as such through relevant litigation and final court judgment, we will compensate the customer 10 times the original purchase price.