Aluminum Ring Front Fork Sliders for R1200 GS (13-16) / ADV (14-16)

．Compatible Models: BMW R1200 GS (13-16) / ADV (14-16)

Product Part Number: DI-FASR-BM-07
Product Name: Aluminum Ring Front Axle Sliders
If a large displacement motorcycle is involved in a crash, repair costs are often substantial. Especially at high speeds, if an accident occurs, excessive friction between the vehicle and the ground can cause the vehicle to bounce off the ground, leading to flipping and greater damage—a phenomenon often referred to in racing as a "high-side" (where a standard low-side slide turns into a bouncing, flipping crash). The outer layer of the DIMOTIV front axle slider is made of POM (Polyoxymethylene),

If a large displacement motorcycle is involved in a crash, repair costs are often substantial. Especially at high speeds, if an accident occurs, excessive friction between the vehicle and the ground can cause the vehicle to bounce off the ground, leading to flipping and greater damage—a phenomenon often referred to in racing as a "high-side" (where a standard low-side slide turns into a bouncing, flipping crash). The outer layer of the DIMOTIV front axle slider is made of POM (Polyoxymethylene),
which features:
1. Shock Absorption: Absorbs impact during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: High hardness and excellent wear resistance.
3. Low Friction Coefficient: Effectively reduces the probability of the vehicle bouncing or flipping due to excessive friction.
This product uses an aluminum alloy axle to pass through the hollow front wheel axle, which does not affect the operation of the stock swingarm or wheel rim. When the slider is impacted, the force is transmitted through the aluminum alloy axle to the other side, reducing direct damage to the swingarm and rim. The POM slider rotates upon impact, thereby reducing friction.

Product Colors: Black/Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%-0.8%; Copper content 0.15%-0.4%; Magnesium content 0.8%-1.2%; Chromium content 0.04%-0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). When plate thickness is less than 0.25 inches (6.4 mm), elongation is 8% or more. When thickness is greater than 0.25 inches (6.4 mm), elongation is 10%.

Surface Treatment:
General Anodizing: Same specification as iPhone and tablet anodizing, featuring corrosion resistance, UV resistance, etc., with weather resistance up to 60 hours. (Fading begins only after continuous exposure to 100eV UV intensity for 60 hours; natural sunlight UV intensity is approximately 3-10eV). Dacromet Anti-rust Treatment: Mounting bolts use premium Dacromet anti-rust treatment, a corrosion-resistant coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely used and is standard on top-tier European motorcycle models.

Installation Instructions:
1. Please confirm the left and right orientation of the product according to the 3D diagram on the back of the packaging.
2. Pass the aluminum alloy axle through the front wheel axle.
3. Secure the sliders on both sides to complete the installation.

Precautions:
If the POM slider or components are damaged beyond use, they can be purchased individually without needing to buy the entire set again.
Compatible Models: BMW R1200GS 13-16, R1200GS ADV 14-16

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Pre-order Notice】
Before placing an order, please double-check the color, size, and other relevant information.
Most products have lead times provided after the order is placed; therefore, some items may be discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other delivery issues, the order will not be processed, and no charges will be incurred.
Please be aware that manufacturers may unilaterally change specifications or design, which may result in differences between the packaging or product appearance and the images shown on the product page.
If a manufacturer's change in design or specifications prevents the product from functioning as expected at the time of order, please contact our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may occasionally cause deformation or damage to the packaging, while the product itself remains intact and functional.
【Return Policy】
If you require a return, please apply via the returns section; ensure the product appearance is maintained and it is packed in its original packaging.
Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible.
For returns due to non-human-induced defects, please apply within 7 days of receipt.
【Authenticity Guarantee】
For products guaranteed to be authentic, if they are found to be suspected counterfeits and confirmed by a court ruling following relevant litigation, we will compensate the customer 10 times the original purchase price.