Aluminum Ring Front Axle Sliders for DRG 158

-

Product Part Number: DI-FASR-SY-02
Product Name: Aluminum Ring Front Fork Slider

If a large motorcycle unfortunately tips over, it often incurs huge repair costs. Especially at high speeds, if an accident occurs and the vehicle body generates excessive friction with the ground, it can cause the vehicle to bounce off the ground, leading to flipping and greater damage (what is often referred to on the track as LOW-SIDE to HIGH-SIDE, where a general sliding accident turns into a vehicle bouncing and rolling). The DIMOTIV rear wheel slider outer layer uses POM (Polyoxymethylene) as the main material, which has the following characteristics:
1. Shock Absorption: Can absorb the impact force during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: A low friction coefficient can effectively reduce the probability of the vehicle body bouncing and flipping due to excessive friction.
This product is fixed to the rear swingarm using an aluminum alloy tensioner, which does not affect the operation of the stock swingarm and wheel rim. The beautifully engraved POM cover, in addition to its protective function, can also enhance the overall visual effect of your bike.

Product Colors: Black / Gold / Blue
Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%; Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). Elongation is 8% or more for thicknesses less than 0.25 inches (6.4 mm). Elongation is 10% for thicknesses greater than 0.25 inches (6.4 mm).

Surface Treatment:
General Anodizing: Anodizing to the same specifications as iPhones and tablets, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours. (Fading begins only after 60 hours of continuous exposure to 100eV UV intensity; natural sunlight UV intensity is approximately 3~10eV). Dacromet Anti-Rust Treatment: Mounting screws use top-tier Dacromet anti-rust treatment, a corrosion-resistant coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely applied and used by top European motorcycle brands.

Installation Instructions:
1. Pass the mounting screw through the slider body and POM cover, then assemble with the aluminum alloy tensioner.
2. Remove the stock rear swingarm plastic cover.
3. Insert this product into the hole and tighten with tools to complete the installation.

Notes:
If the POM or components are damaged and unusable, they can be purchased individually without the need to spend money on a full replacement.

Compatible Models: SYM DRG 19-20

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before ordering, please carefully confirm information such as the desired color and size.
Most products have lead times provided after the order is placed; therefore, some items may be discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or temporary unavailability, the order will not be processed, and no charges will be incurred.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or the product itself differing from the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing its intended function as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery; therefore, packaging may be deformed or damaged during transit, even if the product itself remains intact and fully functional.
【Return Policy】
If you require return services, please apply through the returns section; ensure the product's appearance is maintained and that it is sealed in its original packaging.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For returns due to non-human-induced defects, please apply within 7 days of receiving the product.
【Authenticity Guarantee】
For products with an authenticity guarantee, if any item is found to be a suspected counterfeit and is confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.