3D Front Fork Slider for ZX-10R (16-22) / ZX-6R (599) (07-18)

-

Product Part Number: DI-FAS3D-KA-10
Product Name: 3D Front Fork Sliders

If a large displacement motorcycle unfortunately tips over, it often incurs huge repair costs, especially at high speeds. If an accident occurs, excessive friction between the vehicle body and the ground can cause the vehicle to bounce off the ground, leading to flipping and greater damage. This is often referred to in racing as a "LOW-SIDE to HIGH-SIDE" transition (where a standard sliding accident turns into a bouncing and flipping situation). The DIMOTIV front fork slider outer layer uses plastic steel (scientific name: Polyoxymethylene, abbreviated as POM) as the main material.
It has the following characteristics:
1. Shock Absorption: Can absorb the impact force during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: A low friction coefficient can effectively reduce the probability of the vehicle body bouncing and flipping due to excessive friction.

This product uses an aluminum alloy axle to pass through the hollow front wheel axle, which does not affect the operation of the original swingarm and wheel rim. When the slider puck is impacted, the impact force is transmitted to the other end via the aluminum alloy axle, reducing the direct impact damage to the swingarm and wheel rim.
The exquisitely engraved plastic steel cap not only provides protection but also enhances the overall visual effect of your bike.

Product Colors: Black/Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%, Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). When plate thickness is less than 0.25 inches (6.4 mm), elongation is 8% or more. When thickness is greater than 0.25 inches (6.4 mm), elongation is 10%.

Surface Treatment:
General Anodizing: Anodizing with the same specifications as iPhones and tablets, featuring corrosion resistance, anti-UV properties, and weather resistance up to 60 hours. (It only begins to fade after 60 hours of continuous exposure to 100 eV UV intensity; natural sunlight UV intensity is about 3~10 eV). Dacromet Anti-Rust Treatment: The fixing screws use top-tier Dacromet anti-rust treatment, an anti-corrosion coating mainly composed of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet has a wide range of applications, and top-tier European car models use this anti-rust technology.

Installation Instructions:
1. Please first confirm the left and right orientation of the product according to the 3D diagram on the product backing card.
2. Pass the aluminum alloy axle through the front wheel axle.
3. Lock the slider pucks on both sides to complete the installation.

Notes:
If the plastic steel or components are damaged beyond use, they can be purchased separately without the need to buy the whole set again.

Compatible Models: KAWASAKI ZX-10R 16-22, ZX-6R (599) 07-18

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before ordering, please double-check the color, size, and other information you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other delivery issues, the order will not be processed; no charges will be incurred if the order is not established.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or the product itself differing from the images on the product page.
If a manufacturer's unilateral change in design or specifications prevents the product from performing its intended function as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, so packaging may be deformed or damaged during transit, while the product itself remains intact and functional.
【Return Policy】
If you require a return service, please apply in the returns section; please keep the product appearance intact and pack it in the original packaging box.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For non-human damage or defects, please apply for a return within 7 days of receiving the product.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and confirmed by a court judgment after relevant litigation, we will compensate the customer 10 times the original purchase price.