3D Front Fork Slider for YZF-R3 (15-21)

-

Product Part Number: DI-FAS3D-YA-09

Product Name:
Front Fork Sliders-3D

Product Description:
If a large motorcycle unfortunately tips over, it often requires expensive repairs, especially at high speeds. If an accident occurs, excessive friction between the vehicle body and the ground can cause the vehicle to bounce off the ground, leading to flipping and greater damage—often referred to in racing as a "LOW-SIDE to HIGH-SIDE" (where a standard sliding accident turns into a vehicle bouncing and rolling). The outer layer of the DIMOTIV front fork slider is made of engineering plastic (scientific name: Polyoxymethylene, abbreviated as POM), which has the following characteristics:
1. Shock Absorption: Absorbs impact force during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: A low friction coefficient can effectively reduce the probability of the vehicle body bouncing and flipping due to excessive friction.

This product uses an aluminum alloy axle that passes through the hollow front wheel axle, which does not affect the operation of the stock swingarm and wheel rim. When the slider body is impacted, the impact force is transmitted through the aluminum alloy axle to the other end, reducing the direct impact damage to the swingarm and wheel rim. The beautifully engraved plastic cap not only provides protection but also enhances the overall visual effect of your bike.

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%, Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, tensile strength 42,000 psi (290 MPa), yield strength 35,000 psi (241 MPa). For plate thickness less than 0.25 inches (6.4 mm), elongation is 8% or more. For thickness greater than 0.25 inches (6.4 mm), elongation is 10%.

Surface Treatment:
General Anodizing: Anodizing treatment to the same specifications as iPhones and tablets, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours. (Fading begins only after 60 hours of continuous exposure to 100 eV UV intensity; natural sunlight UV intensity is approximately 3~10 eV). Dacromet Anti-Rust Treatment: Fixing screws use top-tier Dacromet anti-rust treatment, a corrosion-resistant coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely applied and used by top European car brands for this anti-rust technology.

Installation Instructions:
1. Please first confirm the left and right orientation of the product according to the 3D diagram on the back of the product card.
2. Pass the aluminum alloy axle through the front wheel axle.
3. Then lock the sliders on both sides to complete the installation.

Notes:
If the plastic or components are damaged and unusable, they can be purchased individually without needing to buy the whole set again.

Compatible Models:
YAMAHA
YZF-R3 15-21

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Pre-order Notice】
Before placing an order, please double-check the desired color, size, and other relevant information.
Most products have lead times provided after the order is placed; therefore, some items may be discontinued or require a long waiting period for shipment.
Orders will not be processed if the manufacturer is out of stock or unable to supply the goods; no charges will be applied if the order is not finalized.
Please be aware that manufacturers may unilaterally change specifications or design, which may result in differences between the packaging or the product itself and the images shown on the product page.
If a manufacturer's change in design or specifications prevents the product from performing its intended function as expected at the time of purchase, please contact our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, while the product itself remains intact and fully functional.
【Return Policy】
If you require a return service, please apply through the returns section; ensure the product's appearance is maintained and that it is sealed securely in its original packaging.
Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible.
For returns due to non-human-induced defects, please apply within 7 days of receiving the product.
【Authenticity Guarantee】
For products covered by our authenticity guarantee, if any item is found to be a suspected counterfeit and is proven as such through legal proceedings and a final court judgment, we will compensate the customer 10 times the original purchase price.