Front Turn Signal Lens for JET S / SR / SL / SL+

[ Product Functions / Dimensions / Models ]
⚬ Compatible Models: JETS / JET SR / JET SL / JET SL158 dedicated.
⚬ Front Turn Signal Lens Color: Smoked black (transparency approx. 50%), light black (transparency approx. 75%).

JETS/SR/SL/SL158 Front Turn Signal Lens

▍Product Introduction
100% Taiwan scanned reverse-engineered manufacturing, seamless design, imitation of original factory 1:1 brand-new mold production, high fitment!
Cancels the honeycomb design of the original factory shell, upgrades the interior,
After installation, the LED styling can be clearly seen, no longer blurry like a mosaic due to the grid,
Material part uses PC-like plastic same as the original factory, extremely light-transmissive, and heat-resistant to prevent deformation and fading from sun exposure,
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Installation Tutorial ]
⚠️ This lens is not suitable for electric screwdrivers; please use manual screwdrivers to install.
⚠️ When installing, you must apply force evenly to tighten.

Step ⓵ First remove the original factory screws (there are two on one side), then you can remove the original factory lens! Note that the front shell screws are easy to strip, so you need to hold them well before turning.
Step ⓶ The original factory waterproof strip needs to be stuffed back into the lens position; it is easy to stick to it when removing the original factory lens, please be careful not to throw it away by mistake!
Step ⓷ Tear off the protective film of the Star-J front turn signal lens, close the lens, and keep the screws in place without rushing to tighten them!
Step ⓸ After holding it in place, remember not to tighten it all at once; you need to apply force evenly on both sides to tighten it! If you do not apply force evenly, the mounting points are easy to crack! This is considered human error.

After the above steps are completed, you are done! If you need to add styling screws, the specification is "M4*16 self-tapping screw", which you can change yourself♥♥.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Shopping Notes / Precautions ]
● This lens is not suitable for electric screwdrivers; please use manual screwdrivers to install.
● One part of the lens is the mold injection hole area. After cutting, there will be demolding marks. It cannot be seen or is not obvious after installation (please do not inspect it under magnification), which is not a defect. Perfectionists please do not place an order.
● The JET original factory vehicle shell itself has slight tolerances, so installing the seamless tail light lens will not improve this problem, which is a normal phenomenon! It is not within the scope of returns, exchanges, or defects.
● For DIY buyers, it is recommended to evaluate your own installation ability or find a professional technician to assist with installation before purchasing.
● Product failure caused by human factors is not covered by the warranty.
● Please note that the appreciation period is not a trial period! This product is a special item. Once the product is unpacked and used, it cannot be returned or exchanged! Please think twice before ordering.
● To ensure consumer rights, please record the entire process when opening the outer box, check the product contents in the box according to the list, and contact customer service within 24 hours if there are any discrepancies or shortages.
╴When our company receives your order, it is deemed that you have read and agreed to the above precautions╴

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before ordering, please double-check the information such as the color and size you wish to purchase.
Most products have delivery times provided after the order is placed, so there may be situations where products are discontinued or require a long waiting time for shipment.
If an order cannot be fulfilled due to factors such as manufacturer stock shortages or temporary inability to deliver, the order will not be established; no fees will be charged if the order is not established.
Please understand that manufacturers may unilaterally change specifications or exterior designs, which may result in packaging or product styling that differs from the images on the product page.
If a manufacturer's unilateral change in product design or specifications results in the product failing to perform the functions expected at the time of ordering, please consult our customer service for subsequent handling.
Products go through multiple shipping processes from ordering to delivery, so packaging may be deformed or damaged during transport, but the product itself remains intact and usable.
【Return Notes】
If you require return services, please apply in the return section; please keep the product appearance intact and sealed in the original packaging box.
Upon receiving your return request, we will dispatch a logistics provider to collect the goods as soon as possible.
For returns due to non-human damage or defects, please apply for a return within 7 days of receiving the product.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and are confirmed as such by a court judgment after relevant litigation, the customer who purchased the product will be compensated 10 times the original purchase price.