G8X LED Projector Headlight Assembly for FORCE 2.0

[ Product Specifications ]
⚬ Color Temperature: 6000K White Light.
⚬ Specifications: H4, H7, HS1, H17.
⚬ Lens: 26mm.
⚬ Illumination Range: 2.5 lane widths; Brightness: 22000CD.
⚬ Wattage: 18W.
⚬ Low LED operating temperature and low power consumption.
⚬ Built-in fan design for efficient brightness enhancement and improved heat dissipation.
⚬ Built-in thermal control design to extend product lifespan and provide longer usage time.
⚬ Compatible with both common-positive and common-negative vehicle types, e.g., Cygnus 1st-4th Gen, SMAX, GP, Racing King, GT, VJR, Fighter, etc.
⚬ Wattage maintained under 20W (Power consumption: Low beam: 18W, High beam: 18.5W); low LED temperature and power consumption prevent battery drain and headlight housing fogging.
⚬ Designed and manufactured in Taiwan.

▍Product Introduction
Pushing the G8 to the next level,
『G8』 upgraded to 『G8X』 version, with a 20% overall increase in LED brightness,
Light utilization efficiency reaches over 90%, preventing glare, light spill, or blinding oncoming traffic,
Equipped with the "thermal control device" found in all Star-J products,
Utilizing active cooling and a high-speed dual-ball bearing fan, heat dissipation is improved, and the rapid-cooling fan reduces light degradation and failures,
Perfectly upgraded in terms of brightness and product lifespan.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Product Contents ]
FORCE 2.0 Dedicated Kit
⚬ Contents:
G8X LED Mini Projector x2
Clips x2
FORCE 2.0 Dedicated Dual Low/Dual High Beam Harness x1
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
▶ Installation Instructions
⚬ The product packaging includes an instruction manual. It is strongly recommended to read the manual before installation or contact our staff to request a video installation tutorial. Two small screws are included; dual-headlight vehicles support independent height adjustment for both sides and cut-off line angle adjustment. After installation, ensure the fan is tightened to guarantee fan performance.
⚬ The mounting plate screws can adjust the cut-off line angle.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Installation Precautions ]
⚬ The driver and body connectors have arrow markings and are fool-proof. All are tested before shipment. Do not force them in reverse during installation; burning out due to incorrect insertion is not covered under warranty.
⚬ This product can be applied with yellow film, but our lens is made of PC. If the film is not applied flatly and air bubbles form, it will hinder lens heat dissipation, leading to potential lens melting. Lens melting caused by film application is considered human-induced damage. Future lens replacement costs approximately 200 NTD.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ G Series Mini Projector Introduction ]
❶【G8X LED Mini Projector】
Compatible with 90% of vehicles on the market, equipped with a fan, 20% brightness increase, low beam brightness is 22000CD.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Shopping Notes / Precautions ]
● For DIY buyers, it is recommended to evaluate your installation skills or seek assistance from a professional technician before purchasing.
● Human-induced product failure is not covered under warranty.
● Please note that the appreciation period is not a trial period! This is a special product; once opened or used, it cannot be returned or exchanged. Please think carefully before ordering.
● To protect consumer rights, please record a video while opening the outer shipping box and check the contents against the packing list. If there are any discrepancies or missing items, please contact customer service within 24 hours.
╴By placing an order, you are deemed to have read and agreed to the above precautions.╴

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Pre-order Notes】
Before ordering, please double-check the color, size, and other information.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long wait for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other factors, it will not be processed; no charges will be incurred if the order is not established.
Please note that manufacturers may unilaterally change specifications or designs, which may result in packaging or product appearance differing from the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing as expected at the time of order, please consult our customer service for further processing.
Products undergo multiple shipping stages from order to delivery, which may result in deformation or damage to the packaging, while the product itself remains intact and functional.
【Return Notes】
If you require a return service, please apply in the return section; keep the product appearance intact and seal it in the original packaging box.
Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible.
For non-human damage defects, please apply for a return within 7 days of receipt.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and confirmed by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.