Reinforced Wiring Harness for FORCE 2.0 / BW'S

[ Product Specifications ]
Reinforced wiring harness for FORCE and liquid-cooled BWS
⚬ Compatibility: AJ FORCE 1.0 headlight, FORCE 1st-2nd gen headlight projector retrofits, liquid-cooled BWS headlight projector retrofits.
⚬ Dual-relay reinforced harness with independent relays for low/high beam, solving the issue of unstable power supply when switching to high beam.
⚬ Provides stable and sufficient power for halogen bulbs, aftermarket LED, or HID projectors, offering better protection for electronic components.
⚬ Made in Taiwan.

▍Product Introduction
Every vehicle has corresponding products and matched rated fuses;
It is recommended to upgrade the wiring harness when upgrading products,
Because independent power and independent fuses are safer for the vehicle and provide more stable power to our products.

In addition, we provide specialized reinforced wiring harnesses for specific products and vehicle models;
For vehicles with always-on headlights, the factory wiring is under continuous power load;
After 3-5 years, the factory wiring ages, and replacing it with a new one is expensive;
It is recommended to install a reinforced wiring harness to protect the motorcycle and the product;
In the event of a product failure, the reinforced harness fuse will cut off power and provide protection early, preventing the factory wiring from burning out and causing a breakdown.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Precautions / Shopping Guide ]
● Product failure caused by human factors is not covered by warranty.
● Please record a video while unboxing and check for defects or missing parts. If there are any discrepancies or shortages, please contact customer service within 24 hours.
● If the product has been assembled or used, returns or exchanges will not be accepted.
● Photos may have color differences from the actual product due to lighting and monitor settings; this is not considered a defect. The actual product received shall prevail.
╴By placing an order, you are deemed to have read and agreed to the above precautions╴

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before ordering, please double-check the color, size, and other information.
Most products have lead times provided after ordering, so there may be situations where products are discontinued or require a long wait for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other factors, it will not be processed; no fees will be charged if the order is not established.
Please note that manufacturers may unilaterally change specifications or exterior designs, resulting in packaging or product appearance differing from the website images.
If a manufacturer's design or specification change prevents the product from performing as expected, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may cause packaging deformation or damage, while the product itself remains intact and functional.
【Return Policy】
If you require a return service, please apply in the return section; keep the product appearance intact and seal it in the original packaging box.
Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible.
For non-human damage defects, please apply for a return within 7 days of receipt.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and confirmed by a court judgment after relevant litigation, we will compensate the customer 10 times the original purchase price.