G11X LED Mini Projector Bulb

[ Product Specifications ]
⚬ Color Temperature: 6000K White Light
⚬ Specification: H4
⚬ Wattage: 18W
⚬ Lens: 35mm
⚬ Illumination Range: 3.5-4 lanes wide
⚬ Brightness: 35000CD
⚬ Industry's only LED mini projector with secondary optics
⚬ Low LED operating temperature, low power consumption
⚬ Built-in fan design for efficient brightness enhancement and superior heat dissipation
⚬ High beam pattern is correctly positioned on all vehicle models with 33000CD brightness
⚬ Built-in temperature control design to extend product lifespan
⚬ Compatible with both common-positive and common-negative vehicle systems, e.g., Cygnus 1st~4th Gen, SMAX, GP, Racing King, GT, VJR, Fighter, etc.
⚬ Wattage maintained under 20W (Power consumption: Low beam: 18W, High beam: 18.5W), low LED temperature and power consumption, will not cause battery drain or headlight housing fogging
⚬ R&D and manufactured in Taiwan (MIT)

G11X LED Mini Projector 6000K

▍Product Introduction
In 2021, the G11X was the industry's first and widest, brightest LED mini projector,
Lens size is 36MM. Based on the G11 product, the effective range of the light core has been extended to the optical surface,
Increased power, increased brightness, cooling fins upgraded to a fan, and American MSP temperature control chip for more precise calculation.
This product features secondary optics, with a width covering over 3.5 lanes. It achieves maximum brightness and width with the most efficient 18W power consumption,
Clear cutoff line allows for effective illumination without glare. High beam pattern varies depending on the vehicle's reflector surface.

[ How to choose a wide-beam mini projector? ]
How to choose between G11X and G12?
If your reflector is large, consider the G11X, as it utilizes the entire effective optical area of the lens for the low beam reflector.
If your headlight reflector's effective area is smaller than a palm, we recommend the G12,
because the G11X high beam chip may not effectively refract the high beam effect in your reflector bowl.
If you have a Cygnus or a car with a large enough reflector, or if you are not overly concerned about high beam performance, consider the G11X.
If you have a Racing King, we recommend the G12, because the Racing King and Racing reflector bowls are very shallow,
High beam performance will not be as good as other models. If you care about high beam performance, please consider the G12.
Simply put, G11X is an upgraded version of the G11 with increased brightness; G12 allocates some of the lens area to the high beam reflector cup.

║ Product Philosophy ║
"Star-J International" is currently the only company designing and manufacturing LED mini projectors in Taiwan.
Star-J International continues to improve and upgrade its light-core mini projectors,
Designing more products to meet different needs and satisfy a wider range of consumers.
This product is also designed to comply with Taiwan's regulations for light patterns. The new generation G12 LED mini projector creates a wider field of vision, building the brightest platform.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
▶ Installation Instructions
⚬ Product packaging includes a manual. It is strongly recommended to read the manual before installation or contact us for video tutorials. Includes two small screws; dual-headlight models support independent height and cutoff angle adjustment for both sides. After installation, ensure the fan is tightened to guarantee performance.
⚬ Mounting plate screws can adjust the cutoff angle.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
▶ Installation Precautions
❶ Due to the variety of vehicle models, years, and styles, please assess the installation space before installation or consult us.
❷ If your vehicle is a carbureted or AC-powered model, {Strictly Prohibited to Order}. ※ Cygnus 1st and 2nd Gen are three-phase ignition and can be installed.
❸ What is an AC vehicle? Vehicles with a headlight switch that require the engine to be running for the headlight to turn on are AC vehicles; please consult us.
❹ Most trucks and heavy vehicles use 24V systems; do not install standard LED products to avoid burning out the lights; damage caused by this is considered human-induced and will not be covered by the warranty.
❺ Some models have insufficient headlight space, which may cause the fan to hit the housing or instrument panel. The cooling fins can be replaced, but brightness will decrease. Taking G8X as an example, G8X is a fan version with 22000CD brightness. After changing the cooling fins, it will start at 22000CD, but once temperature control activates, it will drop to 18000CD. Because the product has a built-in temperature control system, it will automatically reduce wattage and brightness when the temperature is too high to protect the chip; there are no concerns about product lifespan.
❻ The driver and main unit connectors have arrows and fool-proof designs. All are tested before shipment. Do not force them in reverse; damage from incorrect installation is not covered by the warranty.
➐ This product can be applied with yellow light film, but our lens is PC. If the film is not applied flat and air bubbles form, it will cause poor heat dissipation, leading to lens melting. Lens melting due to film application is considered human-induced damage; the cost for replacing the lens is approximately 200 TWD.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ G-Series Mini Projector Brief Introduction ]
❶【G8X LED Mini Projector】
Compatible with 90% of vehicles on the market, includes fan, 20% brightness increase, low beam brightness 22000CD,
Suitable for H4, H7, HS1 models, e.g., JETS, Racing S, etc. Not suitable for KYMCO single-headlight models.
※ If space is insufficient, cooling fins can be replaced.
❷【G9 LED Mini Projector】
The brightest in the G-series, a focused-beam mini projector, low beam brightness reaches 35000CD.
Suitable for H4 models, e.g., Cygnus 1st~4th Gen, SMAX, GP, Racing King, GT, VJR, Fighter, etc.
❸【G11X LED Mini Projector】
The widest and brightest mini projector on the market, a wide-beam mini projector, center brightness reaches 35000CD.
Suitable for H4 models, e.g., Cygnus 1st~4th Gen, SMAX, GP, Racing King, GT, VJR, Fighter, etc.
❹【G12 LED Mini Projector】
The only mini projector on the market with built-in high/low beam optics, a wide-beam mini projector, low beam brightness 30000CD, high beam brightness 33000CD.
Suitable for H4 models, e.g., Cygnus 1st~4th Gen, SMAX, GP, Racing King, GT, VJR, Fighter, etc.
※ If space is insufficient, cooling fins can be replaced.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
[ Shopping Notice / Precautions ]
● G11X 24W: Strictly prohibited to replace cooling fins, as it will cause poor heat dissipation.
● G6E, Xsense: Original headlight high beam performance is poor; we recommend installing the G12.
● This product comes with a one-year warranty.
● The listed price is for a single unit; for dual-headlight models, please order 2 units.
● For DIY buyers, it is recommended to assess your own installation capabilities or seek assistance from a professional technician before purchase.
● Damage caused by human factors is not covered by the warranty.
● Please note that the appreciation period is not a trial period! This is a special product; once opened and used, it cannot be returned or exchanged! Please think carefully before ordering.
● To ensure consumer rights, please record the entire process of opening the outer box and check the contents against the packing list. If there are any discrepancies or missing items, please contact customer service within 24 hours.╴

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Pre-order Notice】
Before ordering, please double-check the color, size, and other relevant information.
Most products have lead times provided after the order is placed; therefore, some items may be discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other delivery issues, the order will not be processed, and no charges will be incurred.
Please note that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or product appearance differing from the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing as expected at the time of order, please contact our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in the packaging or product appearance differing from the images on the product page.
Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, though the product itself remains intact and functional.
【Return Policy】
If you require a return, please apply via the returns section; ensure the product appearance is maintained and it is sealed in its original packaging.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For non-human-induced defects, please apply for a return within 7 days of receipt.
【Authenticity Guarantee】
For products guaranteed to be authentic, if they are found to be suspected counterfeits through relevant litigation and confirmed by a court judgment, we will compensate the customer 10 times the original purchase price.