FITMENT
[要點]
[Product Components]
・Blinker body x 2
・2 mounting brackets
・Mounting nut, etc.
・Heat shrinkable tube
・Instruction Manual
[Material]
・Blinkers: Die-cast aluminum
・Bracket: Steel
[Effective voltage] DC12V (1.5W)
[Blinker dimensions]
・Total width: 19.8mm (9.8mm lens surface x 14.2mm body length x 10mm including threaded part under the neck)
[Screw diameter dimension] M6 x P1.0
[Weight of blinker] Approx. 5g per pc.
[Effective temperature range] -10°C to 60°C
[Waterproof standard] JIS D 0203
[E mark certification number] 50R-000334
◆Model compatibility
A Group
・SOFTAIL FXDR 114 Model Year: 2019
・SOFTAIL BREAKOUT S SOFTAIL BREAKOUT 114 FXBRS Model Year: 2018-2020
・SOFTAIL BREAKOUT SOFTAIL BREAKOUT FXBR Model Year: 2018-2020
・SOFTAIL FAT BOB SOFTAIL FAT BOB 114 FXFBS Model Year: 2018-2020
・SOFTAIL FAT BOB FXFB Model Year: 2018-2020
・SOFTAIL LOW RIDER SOFTAIL LOW RIDER FXLR Model Year: 2018-2020
・SOFTAIL SLIM SOFTAIL SLIM FLSL Model Year: 2018-2020
B group
・SOFTAIL DELUXE SOFTAIL DELUXE FLDE Model Year: 2018-2020
・SOFTAIL FAT BOY S SOFTAIL FAT BOY 114 FLFBS Model Year: 2018-2020
・SOFTAIL FAT BOY SOFTAIL FAT BOY FLFB Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC 114 FLHCS Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC FLHC Model Year: 2018-2020
・SOFTAIL SPORT GLIDE SOFTAIL SPORT GLIDE FLSB Model Year: 2018-2020
・SOFTAIL STREET BOB SOFTAIL STREET BOB FXBB Model Year: 2018-2020
・Blinker body x 2
・2 mounting brackets
・Mounting nut, etc.
・Heat shrinkable tube
・Instruction Manual
[Material]
・Blinkers: Die-cast aluminum
・Bracket: Steel
[Effective voltage] DC12V (1.5W)
[Blinker dimensions]
・Total width: 19.8mm (9.8mm lens surface x 14.2mm body length x 10mm including threaded part under the neck)
[Screw diameter dimension] M6 x P1.0
[Weight of blinker] Approx. 5g per pc.
[Effective temperature range] -10°C to 60°C
[Waterproof standard] JIS D 0203
[E mark certification number] 50R-000334
◆Model compatibility
A Group
・SOFTAIL FXDR 114 Model Year: 2019
・SOFTAIL BREAKOUT S SOFTAIL BREAKOUT 114 FXBRS Model Year: 2018-2020
・SOFTAIL BREAKOUT SOFTAIL BREAKOUT FXBR Model Year: 2018-2020
・SOFTAIL FAT BOB SOFTAIL FAT BOB 114 FXFBS Model Year: 2018-2020
・SOFTAIL FAT BOB FXFB Model Year: 2018-2020
・SOFTAIL LOW RIDER SOFTAIL LOW RIDER FXLR Model Year: 2018-2020
・SOFTAIL SLIM SOFTAIL SLIM FLSL Model Year: 2018-2020
B group
・SOFTAIL DELUXE SOFTAIL DELUXE FLDE Model Year: 2018-2020
・SOFTAIL FAT BOY S SOFTAIL FAT BOY 114 FLFBS Model Year: 2018-2020
・SOFTAIL FAT BOY SOFTAIL FAT BOY FLFB Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC 114 FLHCS Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC FLHC Model Year: 2018-2020
・SOFTAIL SPORT GLIDE SOFTAIL SPORT GLIDE FLSB Model Year: 2018-2020
・SOFTAIL STREET BOB SOFTAIL STREET BOB FXBB Model Year: 2018-2020
[商品描述]
[Product Components]
・Blinker body x 2
・2 mounting brackets
・Mounting nut, etc.
・Heat shrinkable tube
・Instruction Manual
[Material]
・Blinkers: Die-cast aluminum
・Bracket: Steel
[Effective voltage] DC12V (1.5W)
[Blinker dimensions]
・Total width: 19.8mm (9.8mm lens surface x 14.2mm body length x 10mm including threaded part under the neck)
[Screw diameter dimension] M6 x P1.0
[Weight of blinker] Approx. 5g per pc.
[Effective temperature range] -10°C to 60°C
[Waterproof standard] JIS D 0203
[E mark certification number] 50R-000334
◆Model compatibility
A Group
・SOFTAIL FXDR 114 Model Year: 2019
・SOFTAIL BREAKOUT S SOFTAIL BREAKOUT 114 FXBRS Model Year: 2018-2020
・SOFTAIL BREAKOUT SOFTAIL BREAKOUT FXBR Model Year: 2018-2020
・SOFTAIL FAT BOB SOFTAIL FAT BOB 114 FXFBS Model Year: 2018-2020
・SOFTAIL FAT BOB FXFB Model Year: 2018-2020
・SOFTAIL LOW RIDER SOFTAIL LOW RIDER FXLR Model Year: 2018-2020
・SOFTAIL SLIM SOFTAIL SLIM FLSL Model Year: 2018-2020
B group
・SOFTAIL DELUXE SOFTAIL DELUXE FLDE Model Year: 2018-2020
・SOFTAIL FAT BOY S SOFTAIL FAT BOY 114 FLFBS Model Year: 2018-2020
・SOFTAIL FAT BOY SOFTAIL FAT BOY FLFB Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC 114 FLHCS Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC FLHC Model Year: 2018-2020
・SOFTAIL SPORT GLIDE SOFTAIL SPORT GLIDE FLSB Model Year: 2018-2020
・SOFTAIL STREET BOB SOFTAIL STREET BOB FXBB Model Year: 2018-2020
・Blinker body x 2
・2 mounting brackets
・Mounting nut, etc.
・Heat shrinkable tube
・Instruction Manual
[Material]
・Blinkers: Die-cast aluminum
・Bracket: Steel
[Effective voltage] DC12V (1.5W)
[Blinker dimensions]
・Total width: 19.8mm (9.8mm lens surface x 14.2mm body length x 10mm including threaded part under the neck)
[Screw diameter dimension] M6 x P1.0
[Weight of blinker] Approx. 5g per pc.
[Effective temperature range] -10°C to 60°C
[Waterproof standard] JIS D 0203
[E mark certification number] 50R-000334
◆Model compatibility
A Group
・SOFTAIL FXDR 114 Model Year: 2019
・SOFTAIL BREAKOUT S SOFTAIL BREAKOUT 114 FXBRS Model Year: 2018-2020
・SOFTAIL BREAKOUT SOFTAIL BREAKOUT FXBR Model Year: 2018-2020
・SOFTAIL FAT BOB SOFTAIL FAT BOB 114 FXFBS Model Year: 2018-2020
・SOFTAIL FAT BOB FXFB Model Year: 2018-2020
・SOFTAIL LOW RIDER SOFTAIL LOW RIDER FXLR Model Year: 2018-2020
・SOFTAIL SLIM SOFTAIL SLIM FLSL Model Year: 2018-2020
B group
・SOFTAIL DELUXE SOFTAIL DELUXE FLDE Model Year: 2018-2020
・SOFTAIL FAT BOY S SOFTAIL FAT BOY 114 FLFBS Model Year: 2018-2020
・SOFTAIL FAT BOY SOFTAIL FAT BOY FLFB Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC 114 FLHCS Model Year: 2018-2020
・SOFTAIL HERITAGE CLASSIC SOFTAIL HERITAGE CLASSIC FLHC Model Year: 2018-2020
・SOFTAIL SPORT GLIDE SOFTAIL SPORT GLIDE FLSB Model Year: 2018-2020
・SOFTAIL STREET BOB SOFTAIL STREET BOB FXBB Model Year: 2018-2020
[注意]
*This product is designed based on Harley-Davidson stock lever bracket mirror hole part, so it may not be able to be installed if the mirror and lever bracket are customized.
*If the angle of the lever bracket is changed by the customer, the product will shine according to the angle of the lever bracket, so it may not be visible to the vehicle in front. In some cases, the blinker light may be irradiated to the vehicle's interior mirror.Please pay attention to the angle of the lever bracket for safe operation.
*For vehicles in Group B, since the stock handlebar and lever bracket are installed backward, compared to the photo of the FXBR SOFTAIL BREAKOUT shown in the product image, it is necessary to point the blinker surface forward without passing through the long hole of this product into the manufacturing protrusion on the bottom of the Harley-Davidson stock clutch lever bracket part number 36700200.In such a case, the bracket of this product may stand out from the stock lever bracket.
*For vehicles in Group B, if the handlebar has been replaced with a longer or taller handlebar due to Mexican style customization that has been popular in recent years, it is necessary to attach the lever bracket downward to prevent the blinker light from becoming high beam.
*For vehicle in Group B, some vehicle may have more space in the brake / clutch wire routing, so you may need to devise a way to avoid shading the wire during installation.
*This product is designed for universal, so the wiring of the included Nano blinker is long.When installing on the vehicle, if you want to make it less noticeable without drilling the handlebar, please use KIJIMA products #303-1325,303-1326,303-1327,303-1328,303-1329, self wrap sleeve, KIJIMA products #303-1320,303-1321,303-1322,303-1323, protect mesh, etc. to cover the nano blinker wiring to make it black off and less noticeable and to make it more natural.If you are unsure, it is recommended that you contact your local authorized HARLEY dealer for advice.
*Please note that the mirror bracket may interfere with the under mirror which is attached to the lower part of the handlebar, and this product is designed only for the case where Harley stock mirror is attached to the upper part of the handlebar.
*If the display shows an error message by the ECU sytem due to flashing condition of the blinkers or indicartors after the replacement of Harley stock blinkers, the error code should be cleared by an authorized Harley dealer and countermeasures such as IC blinker relays and registers should be taken.If you are nervous about it, it is not prefeable to bid on.It is strongly recommended that you consult with your local authorized Harley dealer before installation.
*This product is made in accordance with the Harley-Davidson stock clutch lever bracket part number 36700200, which has a protrusion at the time of manufacture, so if your vehicle uses other stock clutch lever bracket parts, you may need to modify the product or install it on the upper flat part of the stock clutch lever bracket mirror hole. It is necessary to install it on the upper flat part of the handlebar bracket mirror hole.
*If you wish to install this product on a model other than the hydraulic clutch model or Milwaukee Eight SOFTAIL model, please consult your local authorized Harley dealer for installation as it may require modification or modification of the installation position.
*For the models other than MILWAUKEE EIGHT SOFTAIL 2018, the right / left blinker protrusion may be different due to the different dimensions of the stock lever bracket.
[About e-mark]
*Automobiles and their parts manufactured in the European Union (EU) are required to obtain EC type approval (EC apprroval) to prove that they meet the standards based on EU directives, regardless of whether they are OE (original equipment) parts or spare parts, in order to ensure safety.
*EC type approval is obligatory for each of the 54 technical standards defined by the individual EU directives, and the EC type approval mark "e-mark" must be displayed.
*EU motorcycle blinkers are required to be marked with the e-mark under International Regulation No. 50, and are subject to mutual recognition under the United Nations Mutual Recognition Agreement for Type Approval of Vehicles, etc., by virtue of their eye taillights and brake lights,
*The e-mark is granted to products that have been approved in accordance with the requirements of ECE Standard and Regulation No. 50.
*Installation position: Depending on the vehicle, it may be necessary to replace the stock blinker relay with a KIJIMA IC relay due to insufficient capacity, or it may be necessary to have the error code removed by an authorized HARLEY-DAVIDSON dealer. It is strongly recommended to ask an authorized HARLEY-DAVIDSON dealer for the assistance.
*This product is a set of nano blinker and bracket.For customers who already have KIJIMA's Nano Blinker KIJIMA part number 219-5179, individual bracket of KIJIMA part number HD-01904 is available.
*If the angle of the lever bracket is changed by the customer, the product will shine according to the angle of the lever bracket, so it may not be visible to the vehicle in front. In some cases, the blinker light may be irradiated to the vehicle's interior mirror.Please pay attention to the angle of the lever bracket for safe operation.
*For vehicles in Group B, since the stock handlebar and lever bracket are installed backward, compared to the photo of the FXBR SOFTAIL BREAKOUT shown in the product image, it is necessary to point the blinker surface forward without passing through the long hole of this product into the manufacturing protrusion on the bottom of the Harley-Davidson stock clutch lever bracket part number 36700200.In such a case, the bracket of this product may stand out from the stock lever bracket.
*For vehicles in Group B, if the handlebar has been replaced with a longer or taller handlebar due to Mexican style customization that has been popular in recent years, it is necessary to attach the lever bracket downward to prevent the blinker light from becoming high beam.
*For vehicle in Group B, some vehicle may have more space in the brake / clutch wire routing, so you may need to devise a way to avoid shading the wire during installation.
*This product is designed for universal, so the wiring of the included Nano blinker is long.When installing on the vehicle, if you want to make it less noticeable without drilling the handlebar, please use KIJIMA products #303-1325,303-1326,303-1327,303-1328,303-1329, self wrap sleeve, KIJIMA products #303-1320,303-1321,303-1322,303-1323, protect mesh, etc. to cover the nano blinker wiring to make it black off and less noticeable and to make it more natural.If you are unsure, it is recommended that you contact your local authorized HARLEY dealer for advice.
*Please note that the mirror bracket may interfere with the under mirror which is attached to the lower part of the handlebar, and this product is designed only for the case where Harley stock mirror is attached to the upper part of the handlebar.
*If the display shows an error message by the ECU sytem due to flashing condition of the blinkers or indicartors after the replacement of Harley stock blinkers, the error code should be cleared by an authorized Harley dealer and countermeasures such as IC blinker relays and registers should be taken.If you are nervous about it, it is not prefeable to bid on.It is strongly recommended that you consult with your local authorized Harley dealer before installation.
*This product is made in accordance with the Harley-Davidson stock clutch lever bracket part number 36700200, which has a protrusion at the time of manufacture, so if your vehicle uses other stock clutch lever bracket parts, you may need to modify the product or install it on the upper flat part of the stock clutch lever bracket mirror hole. It is necessary to install it on the upper flat part of the handlebar bracket mirror hole.
*If you wish to install this product on a model other than the hydraulic clutch model or Milwaukee Eight SOFTAIL model, please consult your local authorized Harley dealer for installation as it may require modification or modification of the installation position.
*For the models other than MILWAUKEE EIGHT SOFTAIL 2018, the right / left blinker protrusion may be different due to the different dimensions of the stock lever bracket.
[About e-mark]
*Automobiles and their parts manufactured in the European Union (EU) are required to obtain EC type approval (EC apprroval) to prove that they meet the standards based on EU directives, regardless of whether they are OE (original equipment) parts or spare parts, in order to ensure safety.
*EC type approval is obligatory for each of the 54 technical standards defined by the individual EU directives, and the EC type approval mark "e-mark" must be displayed.
*EU motorcycle blinkers are required to be marked with the e-mark under International Regulation No. 50, and are subject to mutual recognition under the United Nations Mutual Recognition Agreement for Type Approval of Vehicles, etc., by virtue of their eye taillights and brake lights,
*The e-mark is granted to products that have been approved in accordance with the requirements of ECE Standard and Regulation No. 50.
*Installation position: Depending on the vehicle, it may be necessary to replace the stock blinker relay with a KIJIMA IC relay due to insufficient capacity, or it may be necessary to have the error code removed by an authorized HARLEY-DAVIDSON dealer. It is strongly recommended to ask an authorized HARLEY-DAVIDSON dealer for the assistance.
*This product is a set of nano blinker and bracket.For customers who already have KIJIMA's Nano Blinker KIJIMA part number 219-5179, individual bracket of KIJIMA part number HD-01904 is available.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5