Webike STOCK RECOMMENDATIONS - FAST SHIP
廠商在庫
廠商在庫
DAYTONA
Blinker Relay
廠商在庫
DAYTONA
Correspondence Led Blinker Relay
廠商在庫
DAYTONA
MC Stick LED Blinker Bulb
FITMENT
[要點]
[Material] Mounting bracket: Steel with black finish
[Power consumption] 18W (total of both lamps)
[Luminous intensity] 12V-452LM, 24V-449LM
[Dustproof and waterproof rating] IP67
[Illuminated light] White
[Color temperature] 5000K-6200K
[Set components]
・LED Fog Light Body x 2
・Fog light switch with indicator x 1
・Bracket for each model x 2
・Wiring kit x 1
[Power consumption] 18W (total of both lamps)
[Luminous intensity] 12V-452LM, 24V-449LM
[Dustproof and waterproof rating] IP67
[Illuminated light] White
[Color temperature] 5000K-6200K
[Set components]
・LED Fog Light Body x 2
・Fog light switch with indicator x 1
・Bracket for each model x 2
・Wiring kit x 1
[商品描述]
[Material] Mounting bracket: Steel with black finish
[Power consumption] 18W (total of both lamps)
[Luminous intensity] 12V-452LM, 24V-449LM
[Dustproof and waterproof rating] IP67
[Illuminated light] White
[Color temperature] 5000K-6200K
[Set components]
・LED Fog Light Body x 2
・Fog light switch with indicator x 1
・Bracket for each model x 2
・Wiring kit x 1
[Power consumption] 18W (total of both lamps)
[Luminous intensity] 12V-452LM, 24V-449LM
[Dustproof and waterproof rating] IP67
[Illuminated light] White
[Color temperature] 5000K-6200K
[Set components]
・LED Fog Light Body x 2
・Fog light switch with indicator x 1
・Bracket for each model x 2
・Wiring kit x 1
[注意]
*This product has full-fledged rally raid specifications and is prone to significantly draining the battery in the case of prolonged use and/or combined usage with other electrical components because of the high power consumption (9W x 2) necessary to emit the light yellow LED color temperature (5000-6200K).Please keep in mind to maintain the voltage of the battery frequently.
*When using the product together with electrical components with high power consumption, such as HONDA's stock electrical options, there may be a problem such as electrical component operation stoppage due to insufficient power supply when using the product.
*When using other electrical equipment together, be sure to switch off the fog light kit, or change the location of the power source if using the fog light kit together with other electrical equipment.
*When the handlebar is turned to the left or right, the optical axis of the lights will point in the direction the handlebar is turned.
*Since the light is always projected on where the handlebar is directed, please be careful not to turn the handlebar to the left or right when waiting at a traffic light so that the light is projected on the sidewalk, pedestrian crossing, or oncomig lane, and does not inadvertently obstruct the view of pedestrians or drivers in the oncoming lane.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*When using the product together with electrical components with high power consumption, such as HONDA's stock electrical options, there may be a problem such as electrical component operation stoppage due to insufficient power supply when using the product.
*When using other electrical equipment together, be sure to switch off the fog light kit, or change the location of the power source if using the fog light kit together with other electrical equipment.
*When the handlebar is turned to the left or right, the optical axis of the lights will point in the direction the handlebar is turned.
*Since the light is always projected on where the handlebar is directed, please be careful not to turn the handlebar to the left or right when waiting at a traffic light so that the light is projected on the sidewalk, pedestrian crossing, or oncomig lane, and does not inadvertently obstruct the view of pedestrians or drivers in the oncoming lane.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5