Rear Lowdown Link Rod

[Seat height: Lowered by approx. 25mm]
Color: Black paint finish
Material: Steel

[Seat height: Lowered by approx. 25mm]
Color: Black paint finish
Material: Steel

*The manufacturer is developing the link ratio calculation and actual driving test repeatedly for each model.In general, the larger the amount of lowering, the worse the maneuverability. Please do not install other lowering parts at the same time to increase the amount of lowering of this product.If you have replaced the exhaust, rear suspension, tires or other parts, be sure to check the clearance of each part of the rear suspension at full stroke, and if sufficient clearance cannot be obtained, do not use this product.
*The amount of lowering is a reference value with a stock body (no load).It depends on the condition of the rear suspension (including setting and sagging) and whether or not there are any body accessory parts installed that increase the initial load around the rear.
*Because of the characteristics of the product, the angle of the vehicle body when parked will be raised after installation.Always park with the steering wheel turned to the left and the vehicle tilted to the left.Check the slope of the road surface and the surrounding conditions carefully, and never park the vehicle in a place where it will lean to the right.Special care is required when installing a rear box.
*TRIUMPHDAYTONA675 and Street Triple need to be installed with the short side stand (sold separately).All other models can be used with the stock side stand.
*When installing the product, be sure to have the service manual specified by the vehicle manufacturer and the specified tools (commercially available tools are also acceptable).
*"Rear Low Down Link Rod" is a product name.Some products may have different shapes.