FITMENT
[要點]
*此商品經訂購後不可取消，退貨和換貨，請注意！
標準型(原廠)整流罩用下整流罩[商品描述]
在公共道路上使用時，必須拆除扣眼（排水塞）。您可以使用側面支架
安裝時使用原廠螺栓自攻螺絲。
[注意]
需要在原車頭罩上預鑽兩個孔*使用原車消聲器時，請購買耐熱片（50cm×50cm）（另售）。
雖然本產品是由耐熱樹脂制成，但在最初的烘烤過程中可能會出現食物燒焦的味道。
*將耐熱片（單獨出售）貼在底罩後側靠近催化器排氣管的位置。
※更換了鏈接管的車輛，請購買耐熱板（50cm×25cm）貼在排氣管上。
*圖片顯示的是碳纖維斜紋織品。
[要點]
Under cowl for stock cowl
[商品描述]
Under cowl for stock cowl
[注意]
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Two holes must be machined in the stock cowl
*If using stock exhaust, please purchase the heatproof sheet (50cm x 50cm) separately.
*This product is made of heat-resistant resin, but it may have a smell like burning due to initial heat burn.
*Paste the heatproof sheet (sold separately) on the back side of the under cowl near the catalyzer and exhaust pipe.
*If your vehicle has replaced the link pipe or full exhaust,
Please purchase and attach the heat resistant sheet (50cm x 25cm) to the part of the exhaust pipe.
*The image may be of another type.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Two holes must be machined in the stock cowl
*If using stock exhaust, please purchase the heatproof sheet (50cm x 50cm) separately.
*This product is made of heat-resistant resin, but it may have a smell like burning due to initial heat burn.
*Paste the heatproof sheet (sold separately) on the back side of the under cowl near the catalyzer and exhaust pipe.
*If your vehicle has replaced the link pipe or full exhaust,
Please purchase and attach the heat resistant sheet (50cm x 25cm) to the part of the exhaust pipe.
*The image may be of another type.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5