Webike STOCK RECOMMENDATIONS - FAST SHIP
FITMENT
[要點]
*此商品經訂購後不可取消，退貨和換貨，請注意！
使用耐熱樹脂 側駐：○[商品描述]
通過前鋁網部分的風道吸入空氣，防止熱量積聚。特殊的停留是由一種特殊的樹脂制成的，這使得它雖然是濕碳，但強度卻和干碳一樣。
讓mt-07變得時尚的部件!
[注意]
*其他類型可能包含在圖像中。※我們正在安裝原廠消聲器。外置消聲器可能需要在下罩後部右側切割。
※安裝後，將後懸架預緊力僵化1-2個缺口，對於2名乘客，將預緊力僵化到最大。
【要點】
Heat-resistant resin used
Sidestand: ○
Sidestand: ○
【商品描述】
Heat-resistant resin used
Sidestand: ○
Sidestand: ○
【注意】
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Images may contain other types.
*Fitted with stock exhaust.In the case of an aftermarket exhaust, it may be necessary to cut the rear right side of the under cowl.
*After installation, please stiffen the rear suspension preload by 1-2 notches.For a pillion riding, the preload should be stiffened to the maximum.
*The surface of the product has ruled lines due to the molding process.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Images may contain other types.
*Fitted with stock exhaust.In the case of an aftermarket exhaust, it may be necessary to cut the rear right side of the under cowl.
*After installation, please stiffen the rear suspension preload by 1-2 notches.For a pillion riding, the preload should be stiffened to the maximum.
*The surface of the product has ruled lines due to the molding process.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5