FITMENT
[要點]
*此商品經訂購後不可取消，退貨和換貨，請注意！
■左右一組 材質：斜紋碳纖維冷壓製造方法(表面黒凝膠塗層)[商品描述]
在安裝前遮陽板罩時，可以只使用前遮陽板罩體自帶的標准支架，但對於那些想消除罩體在崎嶇路面或路面縫隙中的震動的人來說，這是一個支撐支架。由於支架是按照出廠時的角度制作的，所以如果支架的角度不合適，請調整杠桿側的角度。
[注意]
*與機罩連接的部分不需要任何鑽孔。鑽孔，使之與頭罩相適應。底座部分與鏡面緊固在一起。*連接到前遮陽板罩的標准支架在施加風壓時不會振動。
[要點]
■Right and left set
Material: Twill weave carbon cold-pressed method (black gel surface)
Material: Twill weave carbon cold-pressed method (black gel surface)
[商品描述]
■Right and left set
Material: Twill weave carbon cold-pressed method (black gel surface)
Material: Twill weave carbon cold-pressed method (black gel surface)
[注意]
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Joints with cowl are not drilled.Please make the hole according to the cowl.The base part is tightened together with the mirror.
*The standard bracket attached to the front visor cowl alone will not cause vibration if exposed to driving wind (wind pressure).
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Joints with cowl are not drilled.Please make the hole according to the cowl.The base part is tightened together with the mirror.
*The standard bracket attached to the front visor cowl alone will not cause vibration if exposed to driving wind (wind pressure).
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5