PAGE TOP

Finger Follower DOHC Bore & Stroke Up Kit (124. 8cc)

List price: TWD 67,488

Selling price: TWD 57,491 15%OFF

Get 1,150 Webike point (Around NT$ 1,150 )
*Can be used as a discount on your next purchase.

Pre-sale Service

TWD 57491.000000

1,150 Webike point

Once you select the option, estimate delivery time will be displayed.

QTY:

FITMENT

[要點]

Compression ratio: Approx.12.4: 1

[商品描述]

Compression ratio: Approx.12.4: 1

[注意]

*This product cannot be installed on FI vehicles.
*Must be installed with Daytona PA Racing Outer Rotor Kit (95033) or MID Outer Rotor Kit (73246) at the same time.
*It is recommended to install the Daytona secondary clutch kit at the same time.
*Boring of the crankcase (56.6-56.8mm, 27.0mm depth) should be done before installing this product, and the necessary parts for simultaneous installation should be replaced before assembling the crankcase (below the waist).
*Always use the supplied plug (NGK ER8).Stock plugs cannot be used.
*It is recommended to install a reinforced crankcase such as CD90 crankcase at the same time.
*The shape of the cylinder and the head of this product is larger than the stock one, and depending on the combination with the suspension parts, there is a possibility that the head may contact with the tire.
*This product may have increased vibration due to the increased bore and stroke.
*When installing this product, be sure to install an oil cooler and an oil temperature gauge to control the oil temperature.Continuous running at high temperatures (over 100°C) may damage the engine.
*The engine may be damaged if the engine speed exceeds the specified speed range (MAX=13000rpm) by Daytona.
*Takegawa reinforced crankcase can not be installed because the cylinder skirt touches it.

REVIEWS FOR THIS PRODUCT(0)

0/5