FITMENT
[要點]
[Material] ABS resin
[Installation time] 1.0h
[Components] Air cleaner seals (2 types)
[Components] (Refer to the instruction manual)
・Air cleaner cover
・Swingarm cover
・Radiator cover
・Rear blinker cover
・Front Fork Covers
・Fuel gate cover
[Installation time] 1.0h
[Components] Air cleaner seals (2 types)
[Components] (Refer to the instruction manual)
・Air cleaner cover
・Swingarm cover
・Radiator cover
・Rear blinker cover
・Front Fork Covers
・Fuel gate cover
[商品描述]
[Material] ABS resin
[Installation time] 1.0h
[Components] Air cleaner seals (2 types)
[Components] (Refer to the instruction manual)
・Air cleaner cover
・Swingarm cover
・Radiator cover
・Rear blinker cover
・Front Fork Covers
・Fuel gate cover
[Installation time] 1.0h
[Components] Air cleaner seals (2 types)
[Components] (Refer to the instruction manual)
・Air cleaner cover
・Swingarm cover
・Radiator cover
・Rear blinker cover
・Front Fork Covers
・Fuel gate cover
[注意]
*Modification is required when used with the axle protector set.(See image)
*FR caliper guard kit (Part number: EH451K35) Cannot be installed at the same time.
*PCX150('18.4-'21.1) [KF30-1000001 to 1199999] cannot be installed on ABS bikes.(Front fork cover only)
*The duct cover and drain tube must be removed from the stock unit and installed on this product.
*If ENDURANCE one has been replaced with an third party rear suspension, the clearance may be too narrow for this product to be installed due to contact with the lower mount.
*The manufacturer has confirmed that this product is compatible only with the stock rear suspension and their rear cushion, but there is a possibility that this product cannot be installed on other rear suspensions.
*Make sure to install the supplied radiator hose guard.Never install the radiator cover without installing it, as this may cause problems.
*This product has been confirmed to fit only the stock exhaust and our exhaust.Please note that the radiator hose guard may not be able to be installed on some exhausts.
*Due to the plating process, there may be unevenness or unpainted parts on the back side.
*Before installation, thoroughly degrease the adhesive surface on the vehicle body side.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*FR caliper guard kit (Part number: EH451K35) Cannot be installed at the same time.
*PCX150('18.4-'21.1) [KF30-1000001 to 1199999] cannot be installed on ABS bikes.(Front fork cover only)
*The duct cover and drain tube must be removed from the stock unit and installed on this product.
*If ENDURANCE one has been replaced with an third party rear suspension, the clearance may be too narrow for this product to be installed due to contact with the lower mount.
*The manufacturer has confirmed that this product is compatible only with the stock rear suspension and their rear cushion, but there is a possibility that this product cannot be installed on other rear suspensions.
*Make sure to install the supplied radiator hose guard.Never install the radiator cover without installing it, as this may cause problems.
*This product has been confirmed to fit only the stock exhaust and our exhaust.Please note that the radiator hose guard may not be able to be installed on some exhausts.
*Due to the plating process, there may be unevenness or unpainted parts on the back side.
*Before installation, thoroughly degrease the adhesive surface on the vehicle body side.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5