[要點]
【材料】
收納盒本體:不銹鋼(黑色烤漆)
支架,鎖扣:鐵
【尺寸】
外殼內側:Φ103mmx 220mm
最大承載重量:1.5kg
整流罩加工等:無
安裝時間:0.2h
側收納架套件請點擊此處
[商品描述]
我們有一個圓筒型收納盒,可以安裝在流行的側收納架套件上!
在圓筒型收納盒上附鎖,以備應急使用和昂貴的雨衣。
圓筒型收納盒使用不銹鋼材質,采用黑色塗裝。
[注意]
※不包括攜帶瓶,束口袋。
※後腳踏不能與側收納盒安裝配件(EI524-K88-A1)一起使用。一定要把後腳踏折起來。
※在Super Cub 110【JA10】中安裝時,必須拆下左後腳踏桿。支架與後腳踏桿之間的接觸可能導致產品損壞。
※請注意,在安裝側收納盒套件或圓筒型收納盒套件時,您將需要拆除左後腳踏。(安裝在Super Cub C125 【JA48】上時)
※ 本產品不能單獨安裝到車輛上。安裝時需要以下產品
.側收納盒套件C125【EJ524K0GA1】
.側收納盒套件('17.11-)【EI524K88A1】
.側收納盒套件【EE524KZVA1】或【EE524KZVB1】
(根據車型不同,圓筒型收納盒套件有不同的類型,請務必確認兼容的車輛。)
※請不要超過負載能力。
※最大承載量包括所有附在圓筒型收納盒套件上的物品的重量,如安全帽支架等。
※由於噴漆工法的原因,收納盒內外側會有一些部分顏色不均勻,但這不是一個缺陷產品。
※ 除了適用車型中列出的車型以外,未列出的車型尚未經確認或可能無法安裝。
※此圖片包括其他顏色。
【要點】
[Material]
Bottle case body: Stainless steel (black coating)
Bracket part, lock part: Steel
[Size]
Case - Unit Inside: Φ103mm x 220mm
Maximum loading capacity: 1.5kg
Machining of cowls, etc: No
Installation time:0.2h
6 months (or up to 5000km of riding after installation)
【商品描述】
[Material]
Bottle case body: Stainless steel (black coating)
Bracket part, lock part: Steel
[Size]
Case - Unit Inside: Φ103mm x 220mm
Maximum loading capacity: 1.5kg
Machining of cowls, etc: No
Installation time:0.2h
6 months (or up to 5000km of riding after installation)
【注意】
*Carrying bottle and drawstring bag are not included.
*Please note that the pillion step cannot be used when the rod case kit (EI524-K88-A1) is installed.Always leave the pillion step folded.
*As installing it on SUPER CUB 110 [JA10], be sure to remove the left side pillion step bar before use.Contact between the bracket and the pillion step bar could result in an accident with the product or a serious accident.
*Please note that the left side pillion step will need to be removed if the rod case kit or bottle case kit is fitted.(In case of installing it on SUPER CUB C125 [JA48])
*This product cannot be installed on the vehicle by itself.The following products are required for installation.
・Rod Case Kit C125 [EJ524K0GA1]
・Rod case kit ('17.11-) [EI524K88A1]
・Rod case kit [EE524KZVA1] or [EE524KZVB1]
(There are different types of rod case kits for different years and models of vehicles, so be sure to check the compatible vehicles.)
*Please do not exceed the load capacity.
*The maximum load capacity includes the weight of all items attached to the bottle case kit, such as helmet holders.
*Due to the painting process, the inside of the case and some parts of the lid may have uneven colors or no color on them, but this is not a product defect.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*Image may contain other colors.