Front Blinker Set Nano Mirror Bolt Mount

[Color]
・Black cathodic finish

[Material]
・Blinkers: Die-cast aluminum
・Bracket: Steel

[Size]
・Blinker dimensions: Lens surface 9.8mm x Body length 14.2mm x Overall width 19.8mm including the threaded part (10mm) under the neck
・Screw diameter dimension: M6 x P1.0

[Weight]
・Blinkers: Approx. 5g per pc.

[Set components]
・Blinker body x 2
・2 mounting brackets
・Mounting nut, etc.
・Heat shrinkable tube
・Instruction Manual

[Specification]
・Effective voltage: DC 12 V(1.5w)
・Effective temperature range: -10 degrees to 60 degrees
・Waterproof rating: JIS D 0203
・E mark certification number: 50R-000334

[Color]
・Black cathodic finish

[Material]
・Blinkers: Die-cast aluminum
・Bracket: Steel

[Size]
・Blinker dimensions: Lens surface 9.8mm x Body length 14.2mm x Overall width 19.8mm including the threaded part (10mm) under the neck
・Screw diameter dimension: M6 x P1.0

[Weight]
・Blinkers: Approx. 5g per pc.

[Set components]
・Blinker body x 2
・2 mounting brackets
・Mounting nut, etc.
・Heat shrinkable tube
・Instruction Manual

[Specification]
・Effective voltage: DC 12 V(1.5w)
・Effective temperature range: -10 degrees to 60 degrees
・Waterproof rating: JIS D 0203
・E mark certification number: 50R-000334

*This product is designed based on Harley-Davidson stock lever bracket mirror hole part, so it may not be able to be installed if the mirror and lever bracket are customized.
*If the angle of the lever bracket is changed by the customer, the product will shine according to the angle of the lever bracket, so it may not be visible to the vehicle in front. In some cases, the blinker light may be irradiated to the vehicle's interior mirror.Please pay attention to the angle of the lever bracket for safe operation.
*This product is designed for universal, so the wiring of the included Nano blinker is long.When installing on the vehicle, if you want to make it less noticeable without drilling the handlebar, please use KIJIMA products #303-1325,303-1326,303-1327,303-1328,303-1329, self wrap sleeve, KIJIMA products #303-1320,303-1321,303-1322,303-1323, protect mesh, etc. to cover the nano blinker wiring to make it black off and less noticeable and to make it more natural.If you are unsure, it is recommended that you contact your local authorized HARLEY dealer for advice.
*If the mirror is replaced with a custom mirror, it may interfere with the mirror, etc. Please note that this product is designed to be used with Harley stock mirror.
*Some vehicles have more play in the brake and clutch wires than others, so you may need to devise a way to route the wires so that they are not in the shadows during installation.
*If the display shows an error message by the ECU sytem due to flashing condition of the blinkers or indicartors after the replacement of Harley stock blinkers, the error code should be cleared by an authorized Harley dealer and countermeasures such as IC blinker relays and registers should be taken.If you are nervous, it is recommended that you consult your local authorized HARLEY dealer before installation.

*Installation position: Depending on the vehicle, it may be necessary to replace the stock blinker relay with a KIJIMA IC relay due to insufficient capacity, or it may be necessary to have the error code removed by an authorized HARLEY-DAVIDSON dealer. It is strongly recommended to ask an authorized HARLEY-DAVIDSON dealer for the assistance.
*There may be changes in product specifications due to the manufacturer's reasons.