Compact Cool Kit (Blade Hose #4)

[Color] Blade hose: Black

[Specification]
■Blade Hose #4
・Outer diameter: Φ11mm
・Inner diameter: Φ5.6mm

■Compact Cool Main Unit
・Oil cooler plate, guard: Stock equipment

[Color] Blade hose: Black

[Specification]
■Blade Hose #4
・Outer diameter: Φ11mm
・Inner diameter: Φ5.6mm

■Compact Cool Main Unit
・Oil cooler plate, guard: Stock equipment

*There may be changes in product specifications due to the manufacturer's reasons.
*The amount of oil is usually 3 fin. to the specified amount of oil: Approx. 40cc / 4 fin: Add approx. 60cc.

[Simultaneous installation of Tappet Breather for SP Takegawa's Stock, Regular, R-stage, R-stage EM / +D and 17R-stage E / +D heads]
*Only 3 fins of the oil cooler can be installed with the tappet breather.
*3 Tappet breather that can be installed at the same time as the 3 fin oil cooler: 90 degree swivel type (07-06-0002).
*This product cannot be used with other tappet breathers.
*If you need a head breather, please purchase a cylinder head cover with breather pipe.(3 fins / 4 fins can be installed at the same time)

[Regarding the simultaneous installation of the tappet breather included in the SP Takegawa Super Head 4V+R Head Kit]
*When the oil cooler body is installed under the frame, only 3 fins of the oil cooler body can be installed at the same time with the attached tappet breather.
*DOHC 4V / 4V+D head, Desmo 4V head and SP Takegawa oil cooler (when installed under the frame) cannot be installed at the same time.
*The harness ring welded to the frame needs to be bent or cut out for installation.
*In case of stock front fork, SP Takegawa steering damper kit cannot be installed at the same time.
*When this product is installed, the stock exhaust and up-exhaust cannot be installed at the same time.
*Applicable to vehicles equipped with SP Takegawa special clutch (sand casting, die casting, TYPE-R WET / DRY) or dry clutch (Type 2 ver.1 / ver.2).
*The special clutch (die-cast) used for SP Takegawa's complete engine (primary type) can also be installed.
*When SP Takegawa special clutch (die-cast) is installed, oil hole plug or thermostat unit cannot be installed at the same time.Simultaneous installation will result in serious engine trouble.

*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.