Mechanical Tachometer

・60Φ
・White LED lighting
・12,000rpm
・For 12V battery vehicles only
・Approximate installation time: 0.5h

・60Φ
・White LED lighting
・12,000rpm
・For 12V battery vehicles only
・Approximate installation time: 0.5h

*An anti-vibration meter bracket is required for installation.
*The tachometer has a gear ratio of 1.5, which is used in the SR and other models: Fits only to stock mechanical tachometers (vehicles using a tachometer cable) with a "5" (5 turns of the crank = 1 turn of the tachometer cable) standard.This product cannot be used for vehicles that are not equipped with a mechanical tachometer as standard equipment (FTR, TW, etc.) or for vehicles with different gear ratios.
*Exclusive for 12V battery vehicles.This product does not work properly on battery-less vehicles and vehicles with 6V batteries (including models converted to 12V electrical).
*It is not completely waterproof.The glass surface may become cloudy due to temperature differences and humidity inside and outside the meter.
*Removing the stock gauges may result in the loss of use of various indicators.Please prepare separately if necessary.
*The meter cable is a consumable item.If the outer tube is cracked or damaged, moisture, oil, dust, etc. may enter the meter and cause a failure.When replacing a mechanical meter, be sure to check the meter cable at the same time and replace it with a new one if necessary.
*The speedometer and tachometer are different from each other due to the difference of the internal structure and the color of the dial, which causes the difference of the luminous state (especially at night).
*The wiring of the harness must be modified to suit the vehicle.Please prepare the crimp terminal etc. separately.
*There may be changes in product specifications due to the manufacturer's reasons.



When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.