Webike STOCK RECOMMENDATIONS - FAST SHIP
Ship now
OPMID
OP Multimeter
Ship now
Ship now
Ship now
KITACO
【OUTLET出清商品】NEW RISM 多功能顯示器
Ship now
廠商在庫
DAYTONA
VELONA Electric Tachometer Φ60
廠商在庫
廠商在庫
廠商在庫
KITACO
Meter Protection Film
廠商在庫
DAYTONA
VELONA Electric Tachometer Φ48
廠商在庫
DAYTONA
VELONA Tacho Meter Kit
廠商在庫
DAYTONA
VELONA Electric Tachometer Φ48
廠商在庫
DAYTONA
VELONA Electric Tachometer Φ60
廠商在庫
OPMID
Top Indicator Octopus
廠商在庫
DAYTONA
VELONA Tacho Meter Kit
廠商在庫
廠商在庫
SP武川
Super Multi DN Meter
FITMENT
UNBOXING [要點]
【功能】
■時速錶 0-360km／h
輪徑設定(設定範圍50-210％ 單位1％)
速度警示燈(設定範圍30-360km／h 單位1km／h)
■指針式轉速錶 0-13000rpm
超轉燈(設定範圍：1000-13000rpm 單位：100rpm)
點火訊號(設定範圍 0.5・1-24)
【里程／區間計程・保養里程・檔位顯示】
■顯示範圍 0-999999km
(單位：1km 超過範圍後將從0開始計算)
總行駛距離
自訂里程設定(可任意設定起始點)
■區間計程範圍 A、B組 0-9999.9km
(單位：0.1km超過範圍後將從0開始計算)
區間計程B組可關閉
■保養里程錶
根據輸入值，其會於行駛時自動倒數。
保養里程(通知模式)
(設定範圍：OFF、500-16000km 單位：100km)
※OFF為不顯示。
■檔位顯示 (顯示內容：OFF、全檔位)
※OFF為不顯示 檔位總數為自動學習
【時鐘・電壓錶・溫度計・油量錶】
■時鐘(設定範圍：12小時制、24小時制)
■電壓錶 (顯示範圍：8-18V)
電壓警示燈(設定範圍8-18V 單位：0.1V)
■溫度計 (顯示範圍：0-150度)
可另購SP武川溫度感測器以量測溫度。
温度警示燈(設定範圍：0-150度)
■油量錶(顯示範圍：6段)
油量感知器電阻預設值 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
自訂電阻值範圍：1-1500Ω
油量警示燈
【指示燈・外部開關】
■指示燈
警示燈(時速／行駛距離／油量／低電壓／溫度／超轉 ※根據設定亮燈)・空檔燈・遠燈・方向燈指示・低油量警示・ABS指示・引擎故障燈
■外部開關
儀錶功能由隨附之外部開關控制。
【背光】
亮度可調(設定範圍：1／5(暗)-5／5(亮)
顏色可調：紅、橘、黄、綠、深藍、淺藍、紫、白
【說明書】
[商品描述]
本產品是Super Multi DN多功能儀錶套件。
接頭對應原廠規格，安裝僅需直接更換，無須對電系進行額外加工。
能夠顯示時速、轉速、檔位、溫度、油量、時間、電池電壓、修正因為變更輪徑產生的速度誤差、變更背光顏色等等，機能滿滿。
並且與原廠儀表板形狀相似，能安裝於相同位置。
[注意]
※使用本品時，請勿安裝其他HID頭燈與其他公司所製造的LED頭燈或是霧燈。可能會發生由於電路的干擾使本產品故障或是運行不順暢等狀況。
※關於檔位顯示功能：設定時需要透過實際騎乘，使電腦自動記錄引擎轉速與時速等數據。設定時請勿在車流量較大的主要道路進行，請於視野良好之空曠地區進行設定，以保安全。
※亮燈示意圖為Monkey 125(JB02)，實際安裝位置與原廠相同。
※製造商可能未經預告變更商品樣式，敬請見諒。
【要點】
[Function]
■Speedometer 0-360km/h
Tire circumference setting (setting range: 50-210%, setting unit: 1%)
Speed warning light (setting range: 30-360km/h, setting unit: 1km/h)
■Tachometer 0-13000rpm
RPM Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm)
Ignition setting (setting range 0.5・1-24)
[Odometer / trip meter, maintenance mileage, gear position]
■Odometer 0-999999km
(Display Unit: Returns to 0 when the 1km range is exceeded)
Total mileage
User-odd setting (start point distance optional input)
■Trip meter A, B 0-9999.9km
(Display Unit: The value returns to 0 when it exceeds the 0.1 km range)
Show / Hide setting of Trip Meter B
■Maintenance mileage
The entered mileage will be automatically decreased as you drive.
Maintenance distance (notification mode)
(Setting range: OFF, 500-16000km Setting Unit: 100km)
*OFF is hidden.
■Gear position (Display contents: OFF, all gears)
*OFF is not displayed Gear number registration function by learning mode
[clock, voltmeter, thermometer, fuel gauge]
■Clock (Setting range: 12 hours, or 24 hours)
■Voltmeter (Display range: 8-18V)
Voltage warning light (Setting range: 8-18V) Setting unit: 0.1V)
■Thermometer (Display range: 0-150 degrees)
The temperature can be measured at the drain bolt by purchasing SP Takegawa drain bolt separately.
Temperature warning light (setting range: 0-150 degrees)
■Fuel gauge (Display range: 6 ways)
Fuel sensor resistance preset 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance setting Resistance range: 1-1500Ω
fuel warning light
[Indicator lamps, external switch]
■Indicator lamps
Warning lights (speed/mileage/fuel/battery low voltage / temperature / rpm *light when item is set), Neutral lamp, High beam lamp, Turn lamp, Fuel level warning lamp, ABS lamp, Engine check lamp
■External switch
All meter operations and function settings are made using the external switches provided with the meter.
[Back light]
Brightness can be adjusted (setting range: 1/5 (dark)-5/5 (light)
Selectable lighting color: Red, Orange, Yellow, Green, Blue, Sky, Purple, White
■Speedometer 0-360km/h
Tire circumference setting (setting range: 50-210%, setting unit: 1%)
Speed warning light (setting range: 30-360km/h, setting unit: 1km/h)
■Tachometer 0-13000rpm
RPM Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm)
Ignition setting (setting range 0.5・1-24)
[Odometer / trip meter, maintenance mileage, gear position]
■Odometer 0-999999km
(Display Unit: Returns to 0 when the 1km range is exceeded)
Total mileage
User-odd setting (start point distance optional input)
■Trip meter A, B 0-9999.9km
(Display Unit: The value returns to 0 when it exceeds the 0.1 km range)
Show / Hide setting of Trip Meter B
■Maintenance mileage
The entered mileage will be automatically decreased as you drive.
Maintenance distance (notification mode)
(Setting range: OFF, 500-16000km Setting Unit: 100km)
*OFF is hidden.
■Gear position (Display contents: OFF, all gears)
*OFF is not displayed Gear number registration function by learning mode
[clock, voltmeter, thermometer, fuel gauge]
■Clock (Setting range: 12 hours, or 24 hours)
■Voltmeter (Display range: 8-18V)
Voltage warning light (Setting range: 8-18V) Setting unit: 0.1V)
■Thermometer (Display range: 0-150 degrees)
The temperature can be measured at the drain bolt by purchasing SP Takegawa drain bolt separately.
Temperature warning light (setting range: 0-150 degrees)
■Fuel gauge (Display range: 6 ways)
Fuel sensor resistance preset 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance setting Resistance range: 1-1500Ω
fuel warning light
[Indicator lamps, external switch]
■Indicator lamps
Warning lights (speed/mileage/fuel/battery low voltage / temperature / rpm *light when item is set), Neutral lamp, High beam lamp, Turn lamp, Fuel level warning lamp, ABS lamp, Engine check lamp
■External switch
All meter operations and function settings are made using the external switches provided with the meter.
[Back light]
Brightness can be adjusted (setting range: 1/5 (dark)-5/5 (light)
Selectable lighting color: Red, Orange, Yellow, Green, Blue, Sky, Purple, White
【商品描述】
[Function]
■Speedometer 0-360km/h
Tire circumference setting (setting range: 50-210%, setting unit: 1%)
Speed warning light (setting range: 30-360km/h, setting unit: 1km/h)
■Tachometer 0-13000rpm
RPM Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm)
Ignition setting (setting range 0.5・1-24)
[Odometer / trip meter, maintenance mileage, gear position]
■Odometer 0-999999km
(Display Unit: Returns to 0 when the 1km range is exceeded)
Total mileage
User-odd setting (start point distance optional input)
■Trip meter A, B 0-9999.9km
(Display Unit: The value returns to 0 when it exceeds the 0.1 km range)
Show / Hide setting of Trip Meter B
■Maintenance mileage
The entered mileage will be automatically decreased as you drive.
Maintenance distance (notification mode)
(Setting range: OFF, 500-16000km Setting Unit: 100km)
*OFF is hidden.
■Gear position (Display contents: OFF, all gears)
*OFF is not displayed Gear number registration function by learning mode
[clock, voltmeter, thermometer, fuel gauge]
■Clock (Setting range: 12 hours, or 24 hours)
■Voltmeter (Display range: 8-18V)
Voltage warning light (Setting range: 8-18V) Setting unit: 0.1V)
■Thermometer (Display range: 0-150 degrees)
The temperature can be measured at the drain bolt by purchasing SP Takegawa drain bolt separately.
Temperature warning light (setting range: 0-150 degrees)
■Fuel gauge (Display range: 6 ways)
Fuel sensor resistance preset 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance setting Resistance range: 1-1500Ω
fuel warning light
[Indicator lamps, external switch]
■Indicator lamps
Warning lights (speed/mileage/fuel/battery low voltage / temperature / rpm *light when item is set), Neutral lamp, High beam lamp, Turn lamp, Fuel level warning lamp, ABS lamp, Engine check lamp
■External switch
All meter operations and function settings are made using the external switches provided with the meter.
[Back light]
Brightness can be adjusted (setting range: 1/5 (dark)-5/5 (light)
Selectable lighting color: Red, Orange, Yellow, Green, Blue, Sky, Purple, White
■Speedometer 0-360km/h
Tire circumference setting (setting range: 50-210%, setting unit: 1%)
Speed warning light (setting range: 30-360km/h, setting unit: 1km/h)
■Tachometer 0-13000rpm
RPM Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm)
Ignition setting (setting range 0.5・1-24)
[Odometer / trip meter, maintenance mileage, gear position]
■Odometer 0-999999km
(Display Unit: Returns to 0 when the 1km range is exceeded)
Total mileage
User-odd setting (start point distance optional input)
■Trip meter A, B 0-9999.9km
(Display Unit: The value returns to 0 when it exceeds the 0.1 km range)
Show / Hide setting of Trip Meter B
■Maintenance mileage
The entered mileage will be automatically decreased as you drive.
Maintenance distance (notification mode)
(Setting range: OFF, 500-16000km Setting Unit: 100km)
*OFF is hidden.
■Gear position (Display contents: OFF, all gears)
*OFF is not displayed Gear number registration function by learning mode
[clock, voltmeter, thermometer, fuel gauge]
■Clock (Setting range: 12 hours, or 24 hours)
■Voltmeter (Display range: 8-18V)
Voltage warning light (Setting range: 8-18V) Setting unit: 0.1V)
■Thermometer (Display range: 0-150 degrees)
The temperature can be measured at the drain bolt by purchasing SP Takegawa drain bolt separately.
Temperature warning light (setting range: 0-150 degrees)
■Fuel gauge (Display range: 6 ways)
Fuel sensor resistance preset 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance setting Resistance range: 1-1500Ω
fuel warning light
[Indicator lamps, external switch]
■Indicator lamps
Warning lights (speed/mileage/fuel/battery low voltage / temperature / rpm *light when item is set), Neutral lamp, High beam lamp, Turn lamp, Fuel level warning lamp, ABS lamp, Engine check lamp
■External switch
All meter operations and function settings are made using the external switches provided with the meter.
[Back light]
Brightness can be adjusted (setting range: 1/5 (dark)-5/5 (light)
Selectable lighting color: Red, Orange, Yellow, Green, Blue, Sky, Purple, White
【注意】
*Cannot be installed with H. I. D. or other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage conversion devices) emit high-voltage noise that adversely affects digital circuits, causing product failure or malfunction.
*On setting the gear position.To set the gear position, both the speed signal and the engine speed signal must be input to the Super Multi DN meter.Therefore, it is necessary to load the data automatically by "actual riding".Please do not set the gear position in the city area because of traffic lights and traffic is dangerous.When riding, please choose a road with good visibility, check the surrounding road conditions, and exercise caution.
*The lighting image is for Monkey 125(JB02).The position of the meter is on the right side as stock.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*On setting the gear position.To set the gear position, both the speed signal and the engine speed signal must be input to the Super Multi DN meter.Therefore, it is necessary to load the data automatically by "actual riding".Please do not set the gear position in the city area because of traffic lights and traffic is dangerous.When riding, please choose a road with good visibility, check the surrounding road conditions, and exercise caution.
*The lighting image is for Monkey 125(JB02).The position of the meter is on the right side as stock.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
Super Multi DN Meter 商品實拍
標籤
全景
特寫
尺寸
顏色 : 本體黑色／飾蓋消光銀
配件 : 安裝支架、儀表外殼、配線組、螺絲、墊片
說明書
特點 : 背景顏色可以切換，另有總里程、單趟里程、維護里程、檔位顯示、時間、電壓、溫度以及燃料顯示。
其他 : Made in Japan
QA（0）
REVIEWS FOR THIS PRODUCT（1）
5/5
5星
1則
4星
0則
3星
0則
2星
0則
1星
0則
升級超有感的儀表套件👍 2022/08/10
by船
因為之前都是騎速克達，剛牽車還不習慣換檔CT125原廠儀表蠻陽春的只有時速、油量表、里程就開始尋找有檔位顯示的儀表套件實體包裝精美~附的說明書超厚 裝上去後長這樣，圓圓一顆很Q，質感也很好儀表設定由這個小小的按鈕調整短壓切換；長壓選擇檔位顯示設定很有趣，要先調到檔位學習模式，儀表會顯示1檔→4檔依照顯示的檔位去升檔讓儀表學習所以建議要找一條空曠的直線道路來設定實際使用心得:儀表可以自己選顏色，有8種可選紅、橘、黄、綠、深藍、淺藍、紫、白多了里程和轉速方便許多!還有電壓計、時間可以看讓新手騎起來也很安心，超級加分!自己覺得改了很值得~