Fog Light Kit

[Material] Mounting bracket: Steel with black finish
[Power Consumption] 18W (total of 2 lamps)
[Luminous intensity] 12V-452LM, 24V-449LM
[Dustproof and waterproof rating] IP67
[Illuminated light] White
[Color temperature] 5000K-6200K
[Set components]
・LED Fog Light Body x 2
・Fog light switch with indicator x 1
・Bracket for each model x 2
・Wiring kit x 1

[Material] Mounting bracket: Steel with black finish
[Power Consumption] 18W (total of 2 lamps)
[Luminous intensity] 12V-452LM, 24V-449LM
[Dustproof and waterproof rating] IP67
[Illuminated light] White
[Color temperature] 5000K-6200K
[Set components]
・LED Fog Light Body x 2
・Fog light switch with indicator x 1
・Bracket for each model x 2
・Wiring kit x 1

*This product is a full-scale rally raid specification that is prone to significantly depleting the battery depending on the conditions of prolonged use of the lights or the use of electrical components together, due to the high power consumption of 9W x 2 emitting yellow (5000-6200K) LED color temperature when the lights are on.Please keep in mind to maintain the voltage of the battery frequently.
*When using the product together with electrical components with high power consumption, such as HONDA's stock electrical options, there may be a problem such as electrical component operation stoppage due to insufficient power supply when using the product.
*When using other electrical equipment (Kijima part number: 304-6302) in conjunction, be sure to turn off the fog lamp kit switch. When using the fog lamp kit in conjunction with other electrical equipment, please change the location from which power is drawn.
*This product can be used in conjunction with a Kijima turn signal relocation bracket (Kijima part number: 217-2042).
*Since this product is fixed to the front headlight bracket, the optical axis will face the steering wheel when the steering wheel is turned to the left or right.
*Since the light is always projected on where the handlebar is directed, please be careful not to turn the handlebar to the left or right when waiting at a traffic light so that the light is projected on the sidewalk, pedestrian crossing, or oncomig lane, and does not inadvertently obstruct the view of pedestrians or drivers in the oncoming lane.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer."
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.