TMR-MJN28 Carburetor Set

■Stock air cleaner box specification
[Specification]
・Inner diameter: Φ28
Carburetor pitch:68-67-68
Spigot outer diameter (mm):28mm
・Spigot total length(mm):27mm

■Stock air cleaner box specification
[Specification]
・Inner diameter: Φ28
Carburetor pitch:68-67-68
Spigot outer diameter (mm):28mm
・Spigot total length(mm):27mm

*It is strongly recommended to replace the stock tank band when installing.
*The stock insulator band can be used, but replacement is recommended.

*[Parts required separately]
・408cc fuel tank (must be replaced if using a 398cc tank to ensure flow)
・Fuel tank fixing rubber (8mm or more rubber mat is required at the rear of the tank)

*You will need one of the following fuel cocks.
・High flow cock made by Siohaus
・PINGEL high flow cock + adapter for CB400F (408)
(Since the high flow cock and the choke lever interfere with each other, it is necessary to modify each cock so that the choke lever does not interfere.)
・Racing Throttle Holder Set with Switch for TMR Small Body (Wiring modification is necessary for general use.)

*For low type handles, the standard switch box can be used by using the following parts.
・Throttle grip inner pipe (for TMR small body) (Part No: 671-320-0000)
・Nut M6 (Part No: 821-006-1000) (*Split nut processing required)
・Throttle wire (both OPEN and CLOSE) must be replaced with one 50-100mm longer than the stock throttle wire for the low type handlebar

*[Equivalents of the following]
・Throttle wire (for CB400F raised handle, OPEN) (HONDA Stock Part No: 17910-333-4052)
・Throttle wire (for CB400F raised handle, CLOSE) (HONDA Stock Part No: 17920-377-710)

*[Parts recommended separately]
・CB400FOUR (408cc: 74-77 / 398cc: 76-77) Machine Bent Straight Cyclone (Part No: 110-441-4640)
Universal oil catch tank set (Part number:535-000-x000)
・Carbon carburetor heat guard sheet set (Part No: 541-001-0000)
・Insulator band (NORMA: 40-60) (Part No: 855-209-4060)

*These parts were confirmed to be installed by Yoshimura Japan during development.If the manufacturer's stock parts have been discontinued, please prepare the appropriate parts.

*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.