Webike STOCK RECOMMENDATIONS - FAST SHIP
FITMENT
[要點]
*此商品經訂購後不可取消，退貨和換貨，請注意！
未上漆的產品管道部分：已連接鋁網
輔料
......frp stay (black gel) x 4
, M6 墊圈 x 1
-m6x15mm 桁架螺釘 x 4
，扣環x 2
[注意]
*不能與普通消聲器一起使用。僅確認用於Akrapovic全套排氣管（帶催化劑的型號）的安裝。如果有必要，請購買並附上一張防熱板（25 x 50）。建議用於前後消音器的左手邊。
*接油結構（有前後兩個扣眼），但由於風道部分開口位置較低，使用前請檢查駕駛活動的規定。
* 在公共道路上使用時，應拆除扣眼。
*本產品由耐熱樹脂制成，但在最初的熱燒過程中會出現 "焦味"。
*frp產品和碳素產品是未上漆的產品。
*frp（黑色凝膠）已經被磨得很亮，可以按原樣使用，但它是一種可畫的產品。
*碳還經過透明膠衣的拋光處理，是一種有光澤的產品。該產品也可以按原樣使用，但如果需要的話，請塗抹聚氨酯透明劑。
* 本產品只能由具有合格知識（根據摩托車制造商發布的維修手冊）和技能的機械師或車間安裝。如果沒有正確安裝或使用，我們不能保證產品的質量。
*圖中顯示的是碳纖維斜紋織法。
請注意，由於制造商的原因，產品規格可能會有變化。請理解。
[要點]
Unpainted products
Duct section: Aluminum mesh already attached
[Components]
・FRP Bracket (Black Gel) x 4
・M6 Washer x 1
・M6 x 15mm truss screw x 4
・Grommet x 2
Duct section: Aluminum mesh already attached
[Components]
・FRP Bracket (Black Gel) x 4
・M6 Washer x 1
・M6 x 15mm truss screw x 4
・Grommet x 2
[商品描述]
Unpainted products
Duct section: Aluminum mesh already attached
[Components]
・FRP Bracket (Black Gel) x 4
・M6 Washer x 1
・M6 x 15mm truss screw x 4
・Grommet x 2
Duct section: Aluminum mesh already attached
[Components]
・FRP Bracket (Black Gel) x 4
・M6 Washer x 1
・M6 x 15mm truss screw x 4
・Grommet x 2
[注意]
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Stock exhaust cannot be installed.Only the Akrapovic full exhaust (catalyzed model) has been checked for fitment.
*If necessary, please purchase a heat-resistant sheet (25 x 50) and attach it.Recommended to be attached on the left side of the under cowl and the rear silencer.
*The oil catch structure (with grommets at two places in the front and rear) is designed to catch the oil, but the position of the opening of the duct part is low, so please use it after confirming the regulations of the running event as using it in the riding event.
*This product is made of heat-resistant resin, but it may have a smell like burning due to initial heat burn.
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*The image shows carbon twill weave.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Stock exhaust cannot be installed.Only the Akrapovic full exhaust (catalyzed model) has been checked for fitment.
*If necessary, please purchase a heat-resistant sheet (25 x 50) and attach it.Recommended to be attached on the left side of the under cowl and the rear silencer.
*The oil catch structure (with grommets at two places in the front and rear) is designed to catch the oil, but the position of the opening of the duct part is low, so please use it after confirming the regulations of the running event as using it in the riding event.
*This product is made of heat-resistant resin, but it may have a smell like burning due to initial heat burn.
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*The image shows carbon twill weave.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5