IC indicator relay Position cut

■For DC (direct current) circuits
[Specifications] Compatible with 3-core LED indicator with position function
[Body size] 46 (60) mm (length) x 31mm (width) x 25mm (width)

■For DC (direct current) circuits
[Specifications] Compatible with 3-core LED indicator with position function
[Body size] 46 (60) mm (length) x 31mm (width) x 25mm (width)

*Not compatible with Honda type bikes equipped with a genuine indicator with front position function.
*This product can be used for DC (direct current) circuits up to 50W in total, regardless of bulb or LED bulb as a function of relay.
*The position can be used for DC (direct current) circuits up to 20W in total, regardless of bulb or LED bulb.
*The position function keeps the front position (left and right lamps) always on when there is no blinker flashing instruction.
*In the case of filament bulbs, there is a possibility of melting the lens or body due to constant lighting.
*Conditions vary depending on the type and wattage of the blinker, so it is always necessary to check with the current bike.If you are unsure, please consult your authorized dealer who will perform the work.
*Depending on the bike model, cutting to the factory harness or extending the wiring may be necessary.
*For use in AC bikes not equipped with a battery, an AC-DC conversion adapter (Kijima part no.: ), sold separately, is required.304-0522) is required.(Only LEDs are acceptable.)
*If it blinks too fast or does not light up or blink properly, there is a possibility of grounding failure.Please consult your authorized dealer to ensure that the battery ground wire is securely connected to the battery ground wire.
*When using LED indicator lights, if the indicator lights for the indicator lights are used for both right and left indicators, use the indicator connection kit (Kijima part no.: ).304-0521) is required separately.(or if you do not use the indicator, it is OK.)
*Connect the body ground to the minus wire as much as possible, as it is prone to malfunctions.
*The blinking speeds in the images are for reference only.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.