Clutch Wire & Sleeve

[Set components]
・Clutch cable: 70mm long
・Pipe Sleeve

[Set components]
・Clutch cable: 70mm long
・Pipe Sleeve

*The attached sleeve is Kijima's handle for the Rebel 1100DCT (Kijima part number: )If it does not fit into the 204-3388), you will need to use a flat-blade screwdriver or similar tool to slightly widen the split and adjust it to fit through the handlebar.
*This product and the handle for Kijima's product Rebel 1100DCT (Kijima Part No: When installing the 204-3388), the factory left side grip heater (Honda part stock number 35520-MLA-305), which was fixed with a strong grip bond at the time of assembly of the new Rebel 1100 at the Honda bike factory, needs to be removed from the factory handlebar and replaced with a new one depending on the condition of the factory left side grip heater (Honda part stock number 35520-MLA-305) must be removed from the stock steering wheel and replaced with a new one depending on the condition of the stock left side grip heater (Honda part stock number 35520-MLA-305).Even if you start the engine and warm up the grip heater to the maximum and pull it out, it is attached really tightly and it may fail in the process of removal.If it is difficult to remove the stock left side grip heater (HONDA stock parts No.35520-MLA-305), you need to purchase a new stock left side grip heater (HONDA stock parts No.35520-MLA-305) by yourself to install this product.In this case, there will be an extra stock handlebar and a stock left side grip heater (HONDA Parts stock No. 35520-MLA-305), which will be necessary to restore the vehicle to its original condition.
*When you remove the stock left side grip heater (HONDA STOCK PART NO.35520-MLA-305), you may get burned, so please use the glove to protect your hand.
*If the heater fails or is destroyed during operation, it must be replaced with a new one (HONDA Stock Part No. 35520-MLA-305).
*This product does not require any changes to the hoses / harnesses / wires, but if you are concerned, please change the brake hoses to an appropriate length.The parking brake may need to be adjusted due to the change in handling.
*Before purchasing this product, please contact the Honda Dream Store where you will have the work done to remove the stock left side grip heater (Honda parts stock number 35520-MLA-305). If it is difficult to remove the stock left side grip heater (Honda parts stock number 35520-MLA-305), it is necessary to prepare and install a new stock left side grip heater (Honda parts stock number 35520-MLA-305) to install this product. If you are concerned about this, please consult with us and let us know that there is work to be done to adjust the tension of the parking brake, and change the brake hose. to the appropriate length.
*There may be changes in product specifications due to the manufacturer's reasons.