Grip Rubber Doctor

[Material/Material]Rubber
[Collar]Black color
[Compatible handlebar diameter] 22.2mm
[Grip length]120mm
[Grip grip thickness]31mm
[GripPenetrating・Closed End]PenetratingOpen End Type
[Product Contents]
Clutch for Left SideGrip (Small diameter)X1 pc
Brake for Right SideGrip (Large diameter)X1 pc

[Material/Material]Rubber
[Collar]Black color
[Compatible handlebar diameter] 22.2mm
[Grip length]120mm
[Grip grip thickness]31mm
[GripPenetrating・Closed End]PenetratingOpen End Type
[Product Contents]
Clutch for Left SideGrip (Small diameter)X1 pc
Brake for Right SideGrip (Large diameter)X1 pc

*In the case of vehicles with a standard 22.2mm handle, many vehicles have a 22.2mm clutch side. Since a handle is used, the inner diameter of the product is 22.2mm, and the brake side is Because it has a throttle cone, a part with an inner diameter of 25.4mm is required to be mounted. The inside diameters are not the same for both of them. If you have any questions, please contact your local dealership or custom shop. We recommend that you ask us to install the grips.
*If the handle is deformed due to a fall or usage conditions, the grip may be damaged. There is a case that it may not be possible to install this product. Please check your vehicle's condition beforehand, and if you have any questions, please contact your nearest authorized dealer.
*For many of the vehicles listed in the compatibility information, the grip size may be longer or shorter than the factory grip size, depending on the individual vehicle. Some vehicles may or may not have custom grips, and some may or may not have bar ends, so it may be necessary to remove and install bar ends. Please be sure to look at the product photos, measure the dimensions of each part, and consider the balance and interference with other parts when installing the product on your car before making a final purchase.
*Depending on the steering wheel used, it may be difficult or loose to fit this product, which is a general-purpose product. In such cases, modifications are required to suit each vehicle body.
*This product is a general-purpose product, the compatible car models listed in the compatibility information are the overall grip length size and the car model and year information that uses the factory throttle pull-back 2-point wire system. Please check the overall length and handlebar size of your car in advance. Please note that we cannot guarantee the compatibility of this product with all vehicles.
*Due to the overwhelming softness of LEVEL:SOFT, the grip surface may "shift" when used by a person with a strong grip or during emergency braking. Please understand that this is due to the overwhelming softness of the product.
*It contains other parts in the photo.
*Please note that the product specification may change due to manufacturer reasons.