FITMENT
[要點]
*此商品經訂購後不可取消，退貨和換貨，請注意！
[商品描述]
反面也是通過冷壓工藝塑造的，以確保緊貼。這種類型是與真正的機箱蓋（發電機蓋）共同緊固的。
[注意]
其他類型包括在圖片中。*圖片顯示的是cbr250rr，但由於它們有相同的發動機，所以可以安裝。
*如果箱子上了漆，由於漆膜的厚度，可能無法安裝。
* 副蓋本身的厚度約為1.5-2.0毫米，所以螺絲必須插入剛過副蓋兩側的孔中。
孔本身是手工鑽的，由於產品誤差，可能很難插入螺絲。
在這種情況下，用棒狀銼刀稍微削尖。
* 根據墜落或事故的大小，發動機保護器可能無法保護你。
請注意，由於制造商的原因，產品規格可能會有變化。請理解。
其他產品可能包括在圖像中。
[商品描述]
[注意]
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Images may contain other types.
*The image shows a CBR250RR, but since the engine is common, it can be installed.
*If the case is painted, it may not be possible to install due to the thickness of the paint film.
*The secondary cover itself is about 1.5-2.0mm thick, so the screws must be inserted into the holes just past the sides of the secondary cover.
The holes themselves are drilled by hand, so there may be cases where screws are difficult to insert due to product errors.
In that case, use a stick file to shave it down a little.
*Depending on the severity of the accident, the engine protector may not be able to protect you.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Images may contain other types.
*The image shows a CBR250RR, but since the engine is common, it can be installed.
*If the case is painted, it may not be possible to install due to the thickness of the paint film.
*The secondary cover itself is about 1.5-2.0mm thick, so the screws must be inserted into the holes just past the sides of the secondary cover.
The holes themselves are drilled by hand, so there may be cases where screws are difficult to insert due to product errors.
In that case, use a stick file to shave it down a little.
*Depending on the severity of the accident, the engine protector may not be able to protect you.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5