Webike STOCK RECOMMENDATIONS - FAST SHIP
Ship now
ENDURANCE
CenterCarrier bag
廠商在庫
MORIWAKI
MONSTER Bottle Kit
廠商在庫
SP武川
Water Tank Kit
廠商在庫
SP武川
Water Tank Kit
廠商在庫
SP武川
2-WAY Multi Bag
廠商在庫
SP武川
Touring Bag
FITMENT
【要點】
Color: hairline
6 months (or up to 5000km of riding after installation)
Installation time:0.2h
[Material]
Bottle case body: Stainless steel
Locking section: Steel
[Maximum loading capacity] 1.5kg
[Dimensions (approx.)] Internal dimensions of the bottle case body: Φ103 x 220mm
Supported Products:Rod case kit (*Needed for installation of this product.)
6 months (or up to 5000km of riding after installation)
Installation time:0.2h
[Material]
Bottle case body: Stainless steel
Locking section: Steel
[Maximum loading capacity] 1.5kg
[Dimensions (approx.)] Internal dimensions of the bottle case body: Φ103 x 220mm
Supported Products:Rod case kit (*Needed for installation of this product.)
【商品描述】
Color: hairline
6 months (or up to 5000km of riding after installation)
Installation time:0.2h
[Material]
Bottle case body: Stainless steel
Locking section: Steel
[Maximum loading capacity] 1.5kg
[Dimensions (approx.)] Internal dimensions of the bottle case body: Φ103 x 220mm
Supported Products:Rod case kit (*Needed for installation of this product.)
6 months (or up to 5000km of riding after installation)
Installation time:0.2h
[Material]
Bottle case body: Stainless steel
Locking section: Steel
[Maximum loading capacity] 1.5kg
[Dimensions (approx.)] Internal dimensions of the bottle case body: Φ103 x 220mm
Supported Products:Rod case kit (*Needed for installation of this product.)
【注意】
*The bottle and drawstring in the image are not included.
●When installed on CT125, Hunter Cub (JA55) and Super Cub 110 (JA10).
*When an ENDURANCE rod case or bottle case is installed, the left side pillion step bar must be removed before use.(Contact with this product may result in damage to the product or a serious accident.)
●When installed on a CT125 / Hunter Cub (JA55).
*This product can be attached at the same time as ENDURANCE Rod Case and Bottle Case, but not with "Helmet Holder (EK507K2EA1) ".
*In addition, it may not be possible to install the product with other peripheral parts due to interference or other reasons.
●When installed on a Super Cub C125 (JA48).
*It is possible to install the rear rack, rod case, and bottle case made by ENDURANCE at the same time, but it may not be possible to install with other peripheral parts due to interference or other reasons.
*The pillion step cannot be used when the rod case kit / bottle case is installed.
*Please be sure to use the pillion step in the folded position as shown in the image.
●When installed on a Super Cub 110 (JA10).
*When an ENDURANCE rod case or bottle case is installed, the left side pillion step bar must be removed before use.(Contact with the bracket may result in damage to the product or a serious accident.)
*The bracket of the bottle case will be attached as shown in the image, so the helmet holder will be a little more difficult to use.
*Please do not exceed the load capacity.
*This product cannot be installed on the vehicle by itself.
*A rod case kit is required for installation.
*Please be sure to check the various types of rod case kits that are compatible with your bike, as there are different types depending on the year and model of the bike.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*When a helmet holder is installed, do not ride with an object hanging on the helmet holder when riding.
*There may be changes in product specifications due to the manufacturer's reasons.
●When installed on CT125, Hunter Cub (JA55) and Super Cub 110 (JA10).
*When an ENDURANCE rod case or bottle case is installed, the left side pillion step bar must be removed before use.(Contact with this product may result in damage to the product or a serious accident.)
●When installed on a CT125 / Hunter Cub (JA55).
*This product can be attached at the same time as ENDURANCE Rod Case and Bottle Case, but not with "Helmet Holder (EK507K2EA1) ".
*In addition, it may not be possible to install the product with other peripheral parts due to interference or other reasons.
●When installed on a Super Cub C125 (JA48).
*It is possible to install the rear rack, rod case, and bottle case made by ENDURANCE at the same time, but it may not be possible to install with other peripheral parts due to interference or other reasons.
*The pillion step cannot be used when the rod case kit / bottle case is installed.
*Please be sure to use the pillion step in the folded position as shown in the image.
●When installed on a Super Cub 110 (JA10).
*When an ENDURANCE rod case or bottle case is installed, the left side pillion step bar must be removed before use.(Contact with the bracket may result in damage to the product or a serious accident.)
*The bracket of the bottle case will be attached as shown in the image, so the helmet holder will be a little more difficult to use.
*Please do not exceed the load capacity.
*This product cannot be installed on the vehicle by itself.
*A rod case kit is required for installation.
*Please be sure to check the various types of rod case kits that are compatible with your bike, as there are different types depending on the year and model of the bike.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*When a helmet holder is installed, do not ride with an object hanging on the helmet holder when riding.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5