PAGE TOP

Fog Light Kit

  • Brand: KIJIMA
  • Product ID: 205-6150Y

List price: TWD 21,282

Selling price: TWD 17,788 16%OFF

Get 178 Webike point (Around NT$ 178 )
*Can be used as a discount on your next purchase.

Pre-sale Service

TWD 17788.000000

178 Webike point

Once you select the option, estimate delivery time will be displayed.

QTY:
Webike STOCK RECOMMENDATIONS - FAST SHIP
【KIJIMA】LED Blinker Set TRL2 Type 廠商在庫
KIJIMA

LED Blinker Set TRL2 Type

$4,778(86%)

【KIJIMA】Fog Lamp Kit LED 廠商在庫
KIJIMA

Fog Lamp Kit LED

$16,518(84%)

【KIJIMA】Fog Light Kit 廠商在庫
KIJIMA

Fog Light Kit

$17,788(84%)

【KIJIMA】Blinker Mount Base 廠商在庫
KIJIMA

Blinker Mount Base

$235(85%)

FITMENT

[要點]

[Set components]
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual
[Fog color] yellow/light yellow
[Bracket color] Black
[Material] Steel
[Specification]
・Power consumption: 9.5W x 2 12V batteries - 0.79A (9.5W)
・Waterproof: IP68
・Light: Yellow, light yellow
・Color temperature: 3000K
Luminous intensity at light use
・12V battery452LM (lumen)
Amount of possible lamp front / rear offset: 10mm
Lens vertical rotation width (when the lens is vertical at 0 degrees on the surface)0-45 degrees
Lower bracket angle (when lens is parallel to the surface at 0 degrees): 0 degrees10 degrees
Rear bracket angle (lens vertical at 0 degrees on surface): 15 degrees
[Size]
・Lens diameter: 67mm
・Body Diameter: 67mm
・Light guard upper dimensions: 88mm
・Light guard height dimensions: 90mm

[商品描述]

[Set components]
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual
[Fog color] yellow/light yellow
[Bracket color] Black
[Material] Steel
[Specification]
・Power consumption: 9.5W x 2 12V batteries - 0.79A (9.5W)
・Waterproof: IP68
・Light: Yellow, light yellow
・Color temperature: 3000K
Luminous intensity at light use
・12V battery452LM (lumen)
Amount of possible lamp front / rear offset: 10mm
Lens vertical rotation width (when the lens is vertical at 0 degrees on the surface)0-45 degrees
Lower bracket angle (when lens is parallel to the surface at 0 degrees): 0 degrees10 degrees
Rear bracket angle (lens vertical at 0 degrees on surface): 15 degrees
[Size]
・Lens diameter: 67mm
・Body Diameter: 67mm
・Light guard upper dimensions: 88mm
・Light guard height dimensions: 90mm

[注意]

*This product is a full-scale rally raid specification that is prone to significantly depleting the battery depending on the conditions of prolonged use of the lights or the use of electrical components together, because of the high power consumption of 9.5W x 2 emitting yellow (3000K) LED color temperature when the lights are on.Please keep in mind to maintain the voltage of the battery frequently.
*If using the electric components with high power consumption such as grip heater, there is a possibility that the electric components stop working due to insufficient power supply when using the product. When using other electrical components together with the fog lamp kit that shuld be switched-off, it is necessary to change the location of the power source or to change to a battery with a larger capacity.
*Because this product is fixed to the front side cowl, the optical axis does not face the steering point when the handlebar is turned left or right.Since the light is always projected to the front of the vehicle with the headlight as the main light, please drive with sufficient caution when driving on unpaved roads with poor street lighting or under conditions where night vision is not effective.
*Installation position: If you are not sure about the installation, it is recommended that you ask a professional shop or a vehicle dealer for advice.
*This product is compatible with KIJIMA's LED blinker kit (sold separately), which consumes less power than the stock bulb type: 219-5173) can be used with.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.

REVIEWS FOR THIS PRODUCT(0)

0/5