FITMENT
【要點】
[Set components]
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual
[Fog color] yellow/light yellow
[Bracket color] Black
[Material] Steel
[Specification]
・Power consumption: 9W x 2 12V batteries - 0.6A (7.3W)
・Waterproof: IP68
・Light: light yellow
・Color temperature: 3000K
Luminous intensity at light use
・12V battery230LM (lumen)
[Size]
・Lamp size:Width 60.5 x 49.5
・Bracket part: 59 x 23mm
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual
[Fog color] yellow/light yellow
[Bracket color] Black
[Material] Steel
[Specification]
・Power consumption: 9W x 2 12V batteries - 0.6A (7.3W)
・Waterproof: IP68
・Light: light yellow
・Color temperature: 3000K
Luminous intensity at light use
・12V battery230LM (lumen)
[Size]
・Lamp size:Width 60.5 x 49.5
・Bracket part: 59 x 23mm
【商品描述】
[Set components]
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual
[Fog color] yellow/light yellow
[Bracket color] Black
[Material] Steel
[Specification]
・Power consumption: 9W x 2 12V batteries - 0.6A (7.3W)
・Waterproof: IP68
・Light: light yellow
・Color temperature: 3000K
Luminous intensity at light use
・12V battery230LM (lumen)
[Size]
・Lamp size:Width 60.5 x 49.5
・Bracket part: 59 x 23mm
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual
[Fog color] yellow/light yellow
[Bracket color] Black
[Material] Steel
[Specification]
・Power consumption: 9W x 2 12V batteries - 0.6A (7.3W)
・Waterproof: IP68
・Light: light yellow
・Color temperature: 3000K
Luminous intensity at light use
・12V battery230LM (lumen)
[Size]
・Lamp size:Width 60.5 x 49.5
・Bracket part: 59 x 23mm
【注意】
*This product is a full-scale rally raid specification that is prone to significantly depleting the battery depending on the conditions of prolonged use of the lights or the use of electrical components together because of the high power consumption of 9W x 2 emitting yellow (3000K) LED color temperature when the lights are on.Please keep in mind to maintain the voltage of the battery frequently.
*When using the product together with electrical components with high power consumption, such as HONDA's stock electrical options, there may be a problem such as electrical component operation stoppage due to insufficient power supply when using the product.
*When using only other electrical equipment, it is necessary to switch off the fog light kit securely, or when using both the fog light kit and other electrical equipment, it is necessary to change the power supply location, or install Kijima's ACC power unit (Kijima part number #304-0539) separately or change to a battery with a larger capacity.
*If you have a Rebel, this product can be installed in combination with either Kijima emblem bracket for Rebel 250 or Rebel 500 (Kijima part #208-3098) or Kijima fairing kit for Rebel 250 or Rebel 500 (Kijima part #305-478).Please note that only one of these products can be installed due to its design.
*Because this product is fixed to the front under-bracket, the optical axis will face the steering point when the handlebar is turned left or right.
*Since the light is always projected on where the handlebar is directed, please be careful not to turn the handlebar to the left or right when waiting at a traffic light so that the light is projected on the sidewalk, pedestrian crossing, or oncomig lane, and does not inadvertently obstruct the view of pedestrians or drivers in the oncoming lane.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer.
*Rebel 250 S Edition cannot be installed due to interference with the cowl mounting position.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*When using the product together with electrical components with high power consumption, such as HONDA's stock electrical options, there may be a problem such as electrical component operation stoppage due to insufficient power supply when using the product.
*When using only other electrical equipment, it is necessary to switch off the fog light kit securely, or when using both the fog light kit and other electrical equipment, it is necessary to change the power supply location, or install Kijima's ACC power unit (Kijima part number #304-0539) separately or change to a battery with a larger capacity.
*If you have a Rebel, this product can be installed in combination with either Kijima emblem bracket for Rebel 250 or Rebel 500 (Kijima part #208-3098) or Kijima fairing kit for Rebel 250 or Rebel 500 (Kijima part #305-478).Please note that only one of these products can be installed due to its design.
*Because this product is fixed to the front under-bracket, the optical axis will face the steering point when the handlebar is turned left or right.
*Since the light is always projected on where the handlebar is directed, please be careful not to turn the handlebar to the left or right when waiting at a traffic light so that the light is projected on the sidewalk, pedestrian crossing, or oncomig lane, and does not inadvertently obstruct the view of pedestrians or drivers in the oncoming lane.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer.
*Rebel 250 S Edition cannot be installed due to interference with the cowl mounting position.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5