Fog Light Kit Yellow LED

[Set components]
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual

[Fog color] yellow/light yellow

[Bracket color] Black

[Material] Steel

[Specification]
・Power consumption: 9.5W x 2 12V batteries - 0.79A (9.5W)
・Waterproof: IP68
・Light: Yellow, light yellow
・Color temperature: 3000K

[Luminous intensity when on]
・12V Battery - 452LM (Lumens)

・Lamp front/rear offset possible: 10mm
・Lens vertical rotation width (when the lens is perpendicular to the surface at 0 degrees): 0-45 degrees
・Lower bracket angle (when lens is parallel to the surface at 0 degrees): 10 degrees
・Rear bracket angle (when the lens is perpendicular to the surface at 0 degrees): 15 degrees

[Size]
・Lens diameter: 67mm
・Body Diameter: 67mm
・Light guard upper dimensions: 88mm
・Light guard height dimensions: 90mm

[Set components]
・LED fog light (yellow/light yellow) x 2
・Fog lamp switch with indicator x 1
・Mounting Bracket x 2
・Wiring Kit
・Instruction Manual

[Fog color] yellow/light yellow

[Bracket color] Black

[Material] Steel

[Specification]
・Power consumption: 9.5W x 2 12V batteries - 0.79A (9.5W)
・Waterproof: IP68
・Light: Yellow, light yellow
・Color temperature: 3000K

[Luminous intensity when on]
・12V Battery - 452LM (Lumens)

・Lamp front/rear offset possible: 10mm
・Lens vertical rotation width (when the lens is perpendicular to the surface at 0 degrees): 0-45 degrees
・Lower bracket angle (when lens is parallel to the surface at 0 degrees): 10 degrees
・Rear bracket angle (when the lens is perpendicular to the surface at 0 degrees): 15 degrees

[Size]
・Lens diameter: 67mm
・Body Diameter: 67mm
・Light guard upper dimensions: 88mm
・Light guard height dimensions: 90mm

*Can be used in combination with Kijima's engine guard (BM-08511) and camera bracket (BM-06650).
*Cannot be used with Hepco & Becker tank guard (502-6507-0001).
*This product is a full-scale rally raid specification that is prone to significantly depleting the battery depending on the conditions of prolonged use of the lights or the use of electrical components together, because of the high power consumption of 9.5W x 2 emitting yellow (3000K) LED color temperature when the lights are on.Please keep in mind to maintain the voltage of the battery frequently.
*If using the electric components with high power consumption such as grip heater, there is a possibility that the electric components stop working due to insufficient power supply when using the product. When using other electrical components together with the fog lamp kit that shuld be switched-off, it is necessary to change the location of the power source or to change to a battery with a larger capacity.
*Because this product is fixed to the front side cowl, the optical axis does not face the steering point when the handlebar is turned left or right.Since the light is always projected to the front of the vehicle with the headlight as the main light, please drive with sufficient caution when driving on unpaved roads with poor street lighting or under conditions where night vision is not effective.
*Installation position: If you are not sure about the installation, it is recommended that you ask a professional shop or a vehicle dealer for advice.
*These products are manufactured in consultation with an non Japanese manufacturer that manufactures fog lamps for railroads, ships, and bikes.
*Because the lens is manufactured in Taiwan, if air containing moisture enters the housing when the lens is pressed in, the inside of the lens may condense within 10-30 minutes after irradiation, but this is considered normal by the manufacturer.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.