Under Cowl for Stock Cowl

※商品可能為「未塗裝」樣式，請於訂購時確認需要的款式。若有任何疑問或需要協助，客服系統都歡迎使用查詢。

※商品可能為訂單成立後生產；若訂單成立後有相關取消／修正之情形，本站保有最終決定權。

*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*FRP products and carbon products are unpainted products (white gel coat, black gel coat, other color gel coat, clear gel coat for carbon products).
*Only confirmed fitting with stock exhaust as of October 2023.Modification may be required for an aftermarket exhaust system.
*This product is made of heat-resistant resin, but it may have a smell like burning due to initial heat burn.
*Paste the heatproof sheet (sold separately) on the back side of the under cowl near the catalyzer and exhaust pipe.
*For bikes that have replaced the link pipe or full exhaust, please purchase a heat resistant sheet (50cm x 25cm) separately and attach it to the exhaust pipe part on the back side of the product.
*Oil catch structure, grommet (drain plug) should be removed for use on public roads.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*There may be changes in product specifications due to the manufacturer's reasons.
*Images may contain other colors.

[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*This product is designed to be painted, so the mixing of other colors and the transparency of the ground surface that appears when finishing (polishing) the split surface are not subject to claims or returns.
*The black gel has been buffed, resulting in a glossy product.It can be used as it is, but it is a product that must be painted.
*The carbon plain weave and twill weave surfaces are buffed with a clear gel coat finish to produce a glossy product.This can be used as it is, but please apply urethane clear if necessary.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.