FITMENT
[要點]
[OEMMirrorECE certificate number]E13 006461/E4 000659
new
Proximity Stationary Noise Volume85dBMounting Duration0.3h:0.25h
Mirror diameter:Φ105
Type:KAWASAKI3
new
Proximity Stationary Noise Volume85dBMounting Duration0.3h:0.25h
Mirror diameter:Φ105
Type:KAWASAKI3
[商品描述]
[OEMMirrorECE certificate number]E13 006461/E4 000659
new
Proximity Stationary Noise Volume85dBMounting Duration0.3h:0.25h
Mirror diameter:Φ105
Type:KAWASAKI3
new
Proximity Stationary Noise Volume85dBMounting Duration0.3h:0.25h
Mirror diameter:Φ105
Type:KAWASAKI3
[注意]
※The vehicle model may have different specifications in different regions and may not be compatible for installation.
*This product is attached with strong adhesive force and cannot be peeled off. Please note that this product and the genuine mirror side may be broken if it is forcibly peeled off.
*This product is made of glass. Please handle it with care to avoid injury or breakage.
*Since the adhesive strength of the double-coated adhesive tape decreases when the temperature is low, it is recommended to warm the tape lightly with a hair dryer or the like before installation.
*Avoid exposure to water and vibration until the tape is fully adhered (takes about 24 hours).
*Due to the manufacturing error of the mirror on the car body side, there may be a gap between the mirror and this product. In case of misalignment, paint along the frame of the mirror with a black oil-based marker to make the gap less noticeable.
*If this product does not fit into the car body, warm the edge of the mirror on the car body side with a hair dryer or the like to make it easier to fit.
*Strong double-sided tape is used, so it cannot be reapplied. Please position the tape carefully. If you try to remove the tape forcibly, the mirror may be damaged or you may be injured. Do not attempt to remove it forcibly.
*This product is a wide mirror type. The perspective is different from the original mirror. Please drive carefully until you get used to it.
*The mirror has smooth edges, but please be careful not to cut your hand.
*Do not use chemicals for mirrors.
*It contains other products in the photo.
*Please note that the product specification may change due to manufacturer reasons.
*This product is made of glass. Please handle it with care to avoid injury or breakage.
*Since the adhesive strength of the double-coated adhesive tape decreases when the temperature is low, it is recommended to warm the tape lightly with a hair dryer or the like before installation.
*Avoid exposure to water and vibration until the tape is fully adhered (takes about 24 hours).
*Due to the manufacturing error of the mirror on the car body side, there may be a gap between the mirror and this product. In case of misalignment, paint along the frame of the mirror with a black oil-based marker to make the gap less noticeable.
*If this product does not fit into the car body, warm the edge of the mirror on the car body side with a hair dryer or the like to make it easier to fit.
*Strong double-sided tape is used, so it cannot be reapplied. Please position the tape carefully. If you try to remove the tape forcibly, the mirror may be damaged or you may be injured. Do not attempt to remove it forcibly.
*This product is a wide mirror type. The perspective is different from the original mirror. Please drive carefully until you get used to it.
*The mirror has smooth edges, but please be careful not to cut your hand.
*Do not use chemicals for mirrors.
*It contains other products in the photo.
*Please note that the product specification may change due to manufacturer reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5