FITMENT
[要點]
Height: 160-168cm (This is a hypothetical guideline for operational safety.)
Stock comparison (seating position): Upper body shifted forward about 10mm from stock
Seat surface increased approx. 30mm compared to stock by adding padding
Seat x 1
Tool bag x 1 (no stock tools included)
Tool bag retaining band x 1
User's Manual x 1
Stock comparison (seating position): Upper body shifted forward about 10mm from stock
Seat surface increased approx. 30mm compared to stock by adding padding
Seat x 1
Tool bag x 1 (no stock tools included)
Tool bag retaining band x 1
User's Manual x 1
[商品描述]
Height: 160-168cm (This is a hypothetical guideline for operational safety.)
Stock comparison (seating position): Upper body shifted forward about 10mm from stock
Seat surface increased approx. 30mm compared to stock by adding padding
Seat x 1
Tool bag x 1 (no stock tools included)
Tool bag retaining band x 1
User's Manual x 1
Stock comparison (seating position): Upper body shifted forward about 10mm from stock
Seat surface increased approx. 30mm compared to stock by adding padding
Seat x 1
Tool bag x 1 (no stock tools included)
Tool bag retaining band x 1
User's Manual x 1
[注意]
*This product encourages the enjoyment of switching out or replacing the seat for a fresh look. If you do not transfer the stock parts listed below from the original seat (or if you want to keep both the original and this product's seat ready for quick replacement), you will need to separately purchase the stock parts listed below. Please refer to the instruction manual included under the seat when installing this product.
・Rubber (Honda Stock Part Number 77205-MFE-670) x 2 pcs
・Sponge (Honda Stock Part Number 77101-K87-A30) x 2 pcs
・Rubber (Honda Stock Part Number 77205-KPP-T00) x 2 pcs
・1-point stop rubber (Honda Stock Part Number 77206-KPK-900) x 2 pcs
・Grommet (Honda Stock Part Number 61304-415-000) x 2 pcs
*If you are skilled at transferring the stock parts on the underside of the seat, have no immediate plans to use the stock seat (and don't mind transferring the stock parts back to the stock seat later), and if the stock parts are not worn out, feel free to reuse them. This product is based on the stock Rebel seat from 2020 models onwards, so the necessary stock parts may vary depending on the model year.
・2017-2019 models: Rubber (Honda Stock Part Number 77205-MFE-670) x 2 pcs
・Sponge (Honda Stock Part Number 77101-K87-A30) x 2 pcs
・Rubber (Honda Stock Part Number 77205-KPP-T00) x 2 pcs
*2020 model: Prepare 2 sponges (Honda Stock Part Number 77101-K87-A30).
*If you plan to use the stock Allen wrench stored inside the right-side cover of the bike to remove the stock seat, be aware that the special phillips-head screw (with a flathead portion designed to be turned with a coin edge) securing the Allen wrench is extremely tight. We recommend preparing a separate Allen wrench in advance.To remove the stock seat with an Allen wrench, loosen the two bolts slightly visible at the rear of the seat while pushing the stock seat by hand.In this case, the Allen wrench may touch the pipe frame near the seat, so please apply Kijima Protection Film (Kijima Part Number 208-0852) or the like, or place a used towel or the like and remove it carefully to prevent scratches.
*Please note that due to the addition of extra padding, the position of the buttocks is shifted towards the front of the bike compared to the standard seat, bringing the crotch area closer to the fuel tank.
*There may be a slight gap between the seat and the frame due to individual differences in the product and production lots.
*Although waterproof measures are taken, water can easily enter through the seams due to the structure of the garment, so please maintain the garment by regularly applying waterproofing spray.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
・Rubber (Honda Stock Part Number 77205-MFE-670) x 2 pcs
・Sponge (Honda Stock Part Number 77101-K87-A30) x 2 pcs
・Rubber (Honda Stock Part Number 77205-KPP-T00) x 2 pcs
・1-point stop rubber (Honda Stock Part Number 77206-KPK-900) x 2 pcs
・Grommet (Honda Stock Part Number 61304-415-000) x 2 pcs
*If you are skilled at transferring the stock parts on the underside of the seat, have no immediate plans to use the stock seat (and don't mind transferring the stock parts back to the stock seat later), and if the stock parts are not worn out, feel free to reuse them. This product is based on the stock Rebel seat from 2020 models onwards, so the necessary stock parts may vary depending on the model year.
・2017-2019 models: Rubber (Honda Stock Part Number 77205-MFE-670) x 2 pcs
・Sponge (Honda Stock Part Number 77101-K87-A30) x 2 pcs
・Rubber (Honda Stock Part Number 77205-KPP-T00) x 2 pcs
*2020 model: Prepare 2 sponges (Honda Stock Part Number 77101-K87-A30).
*If you plan to use the stock Allen wrench stored inside the right-side cover of the bike to remove the stock seat, be aware that the special phillips-head screw (with a flathead portion designed to be turned with a coin edge) securing the Allen wrench is extremely tight. We recommend preparing a separate Allen wrench in advance.To remove the stock seat with an Allen wrench, loosen the two bolts slightly visible at the rear of the seat while pushing the stock seat by hand.In this case, the Allen wrench may touch the pipe frame near the seat, so please apply Kijima Protection Film (Kijima Part Number 208-0852) or the like, or place a used towel or the like and remove it carefully to prevent scratches.
*Please note that due to the addition of extra padding, the position of the buttocks is shifted towards the front of the bike compared to the standard seat, bringing the crotch area closer to the fuel tank.
*There may be a slight gap between the seat and the frame due to individual differences in the product and production lots.
*Although waterproof measures are taken, water can easily enter through the seams due to the structure of the garment, so please maintain the garment by regularly applying waterproofing spray.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
QA（0）
REVIEWS FOR THIS PRODUCT（0）
0/5