PAGE TOP

Blast Barrier X

List price: TWD 4,597

Selling price: TWD 3,723 19%OFF

Spring Sale: Free Shipping Event from Now Until March 31!
Enjoy Free Shipping on Orders Over TWD 9,999!
※EMS shipping only.

Get 37 Webike point (Around NT$ 37 )
*Can be used as a discount on your next purchase.

Pre-sale Service

TWD 3723.000000

37 Webike point

Once you select the option, estimate delivery time will be displayed.

QTY:

FITMENT

[要點]

商品顏色:燻黑色

材質:聚碳酸酯(厚度3 mm)

尺寸:約長380 mm x寬340 mm

 

【商品內容】

風鏡:1 個

減震海綿:1 個

安裝膠帶:1 個

安裝螺絲:2 個(M6 x 25 mm)

安裝螺絲:2 個(M6 x 20 mm)

U型螺帽:4個

墊片:4個

錐形墊片:4個

緩衝橡膠:2個

橡膠墊片:2個

[商品描述]

超人氣Blast Barrier X 的風鏡,鮮明的流線設計讓人留下深刻的印象!

使用日本製造的聚碳酸酯(厚度3毫米)。 它比相同厚度的丙烯酸強約30倍,並且具有很高的透明度和耐用性!

流線型風鏡具有高透明度和強度,並同時強調安全性!(不包括擾流板部分)。

商品約長380 mm x寬340 mm(從前照燈槽口的上端到風鏡的上端,長度約為275mm)。

泛用的商品,搭配專屬支架就能適用多種車款!

[注意]

※固定支架需要另外購買。

※CB1100 RS(SC65)17:需要另外購買其他商品方能安裝(61380)與(92322)。

※安裝時需要適度的調整,以便影響其他部件的作動。

※安裝請勿使用過大的扭矩。

※請勿使用含有溶劑的清潔劑或防水劑,因為它們可能會損壞風鏡表面或導致破裂。

※以下兩個商品無法與本商品同時安裝:(71540)與(71545)


【訂購前注意】

訂購前,還請詳加確認欲購買的顏色或規格。
商品多為下定後回覆交期,所以可能有商品停產之狀況
訂單若因為廠商缺貨與暫時無法交貨等因素,則不會成立;訂單若沒有成立則不會收取任何費用。


【退換貨注意】
若您需要商品退換貨的服務,還請您至退換貨區塊進行申請;並請您保持商品外觀、用原包裝外箱封裝完好。
在收到您的退換貨申請時,我們會盡快派物流業者前去收貨。


【正品保證】
正品保證之商品,若有被查獲疑似為仿冒品,並經過相關訴訟,最後交由法院判決如實者,將會對購買此商品的顧客進行當初購買價格的10倍賠償。

【要點】

smoke
Material: Polycarbonate (Thickness 3mm)
Size: Length 380mm x width 340mm
[Set components]
・Windshield x 1
・Sponge x 1
・Double-sided tape x 1pc
・Flat Cap Screw (M6 x 25mm) x 2pcs.
・Flat Cap Screw (M6 x 20mm) x 2pcs.
・U Nut x 4pcs.
・Flat Washer x 4pcs.
・Rosette Washer x 4pcs.
・Cushion rubber (2mm thickness) x 2pcs.
・Rubber spacer (three-dimensional rubber) x 2pcs.

【商品描述】

smoke
Material: Polycarbonate (Thickness 3mm)
Size: Length 380mm x width 340mm
[Set components]
・Windshield x 1
・Sponge x 1
・Double-sided tape x 1pc
・Flat Cap Screw (M6 x 25mm) x 2pcs.
・Flat Cap Screw (M6 x 20mm) x 2pcs.
・U Nut x 4pcs.
・Flat Washer x 4pcs.
・Rosette Washer x 4pcs.
・Cushion rubber (2mm thickness) x 2pcs.
・Rubber spacer (three-dimensional rubber) x 2pcs.

【注意】

*Approx. fitment for CB650R 2021 model (CB650RAM J 2BL-RH03).Must be installed with the model specific installation bracket (99238).
*Installation image is for reference only.
*Mounting brackets are sold separately.
*CB1100 RS (SC65) 17:Part numbers 61380 and 92322 are required.
*The bracket for installation is the same specification as the conventional Blast Barrier & Aero Visor for the models listed in the compatibility chart on the right.(It will not interfere with Blast Barrier or Aero Visor and no need to change the bracket.)
*When installing, temporarily assemble the bracket and windshield so that no stress is applied to any part of the windshield when it is mounted on the bike.(Also, be careful not to over-torque the windshield and bracket when tightening them to avoid damage.A lock nut is used to prevent the nut from loosening.
*Do not use cleaners or water repellents containing solvents, as they may damage the surface of the windshield or cause it to crack.
*Blast barrier and garnish face (71540-71545) cannot be installed.
*This product comes with a set of child parts necessary for attaching the optional vehicle specific bracket to the vehicle body.
*There may be changes in product specifications due to the manufacturer's reasons.

QA(2)

1.請問還有其他角度的照片嗎? 若購買後覺得不適合可以退貨嗎?謝謝!

此商品僅包含風鏡,不包含安裝支架,安裝支架需要依照您的車型另外選購,若有需要請提供您的愛車車型與出廠年份,這邊會協助您確認。 DAYTONA原廠介紹 http://www.daytona.co.jp/products/single-71539-parts 在Webike台灣所購買的商品(正廠零件除外),若您在收到商品之後發現尺寸不合適或是其它原因,依照"消費者保護法"規定,在您收到貨後七天內的猶豫鑑賞期,我們都會協助您辦理商品退貨或是換貨,但"猶豫鑑賞期"並非試用期,若有發現商品有被明顯使用過的痕跡,或是包裝、配件遺失破損,我們有權力拒絕此申請,以上說明都以"消費者保護法"為依據。關於退換貨說明您可以參考下列連結。 退換貨說明 https://www.webike.tw/customer/rule/member_rule_2#M

2.請問DAYTONA Blast Barrier X 商品編號: 71539,HONDA CB650R 2019可以用嗎?謝謝

經查詢 此商品可適用於 CB650R 19年份 若您訂購收到商品,請先將包裝保存完整,並加以比對看看,若不適用,本站皆可協助您於10日內申請退換貨。

REVIEWS FOR THIS PRODUCT(0)

0/5