Front Axle Sliders for CB400F/X / CB500F/X / CBR500R / CBR400R

-

Product Part Number:
DI-FAS3D-HO-08

Product Name:
3D Front Fork Sliders

Product Introduction:
If a large motorcycle tips over, it often incurs high repair costs, especially at high speeds. If an accident occurs, excessive friction between the vehicle and the ground can cause the vehicle to bounce, leading to flipping and greater damage—often referred to in racing as a transition from a low-side to a high-side. DIMOTIV front fork sliders use POM (polyoxymethylene) as the primary material, featuring:
1. Shock Absorption: Absorbs impact force during a tip-over, effectively protecting the vehicle.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: Low friction coefficient effectively reduces the probability of the vehicle bouncing and flipping due to excessive friction.

This product uses a chromoly steel axle to replace the original front wheel axle, which does not affect the operation of the original swingarm or wheel rim. When the slider puck is impacted, the force is transmitted through the chromoly steel axle to the other side, reducing direct impact damage to the swingarm and wheel rim.
The exquisite decorative POM cap provides protection while enhancing the overall visual appeal of your bike.

Product Colors:
Black / Gold / Titanium

Product Material:
6061-T6 aluminum-magnesium alloy: Silicon 0.4%-0.8%; Copper 0.15%-0.4%; Magnesium 0.8%-1.2%; Chromium 0.04%-0.35%. Tensile strength 42,000 psi (290 MPa), yield strength 35,000 psi (241 MPa). For thickness < 0.25 inches (6.4mm), elongation is 8% or more. For thickness > 0.25 inches (6.4mm), elongation is 10%.
Chromoly Steel: A reinforced steel with high hardness and high elasticity (Young's modulus 200-207), indicating excellent impact absorption characteristics.

Surface Treatment:
Standard Anodizing: Same specification as iPhone and tablet anodizing, featuring corrosion and UV resistance, with weather resistance up to 60 hours. (Fading begins after 60 hours of continuous exposure to 100eV UV intensity; natural sunlight UV intensity is approximately 3-10eV). Dacromet Anti-Rust Treatment: Fixing screws use premium Dacromet anti-rust treatment, a corrosion-resistant coating primarily composed of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely used and is the standard anti-rust technology for high-end European motorcycle models.

Installation Instructions:
1. Refer to the 3D diagram on the back of the packaging to confirm the left and right orientation.
2. Use a motorcycle stand to lift the bike.
3. Remove the original front wheel axle nut.
4. Remove the original wheel axle.
5. Insert the included chromoly steel axle.
6. Secure the sliders on both sides to complete installation.

Notes:
If the POM slider or components are damaged, they can be purchased individually without needing to buy the entire set again.

Compatible Models:
HONDA
CB400 F 14-16
CB400 X/CB500 X 14-15
CB500 F 13-16
CBR400 R 13-14
CBR500 R 13-21

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before placing an order, please double-check the color, size, and other relevant information.
Most products have lead times provided after the order is placed; therefore, some items may be discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or temporary unavailability, the order will not be processed, and no charges will be incurred.
Please be aware that manufacturers may unilaterally change specifications or design, which may result in the packaging or the product itself differing from the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing its intended function as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in the packaging or the product itself differing from the images on the product page.
Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, even if the product itself remains intact and functional.
【Return Policy】
If you require a return service, please apply via the returns section; ensure the product's appearance is maintained and it is packed in its original packaging.
Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible.
Returns for non-human-induced defects must be requested within 7 days of receipt.
【Authenticity Guarantee】
For products guaranteed to be authentic, if any item is found to be a suspected counterfeit and is confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.