3D Rear Swingarm Spools for T-MAX 500 / T-MAX 530 and other models

．Applicable models: YAMAHA T-MAX 500 (08-11) / T-MAX 530 (12-15), BRONZE MAX (12-15), XP 500 (08-11), XP 530 (12-15)

Product Model: DI-RAS3D-YA-02 (Engraved Version)
Product Name: 3D Rear Swingarm Sliders
If a large-displacement motorcycle unfortunately tips over, it often incurs significant repair costs. Especially at high speeds, if an accident occurs and excessive friction is generated between the vehicle body and the ground, it can cause the vehicle to bounce off the ground, leading to rollovers and greater damage. This is what is often referred to on the track as (LOW-SIDE → HIGH SIDE, where a standard sliding accident turns into a vehicle bouncing and rolling situation). The outer layer of the DIMOTIV rear wheel sliders is made of plastic steel (scientific name: Polyoxymethylene, abbreviated as POM) as the main material, which has the following characteristics:
1. Shock absorption: Can absorb the impact force during a tip-over, effectively protecting the vehicle body.
2. High rigidity: Strong hardness and high wear resistance.
3. Low friction coefficient: A low friction coefficient can effectively reduce the probability of the vehicle body bouncing and rolling over due to excessive friction.

This product uses an aluminum alloy tensioner to fix it to the rear swingarm, which does not affect the operation of the original swingarm and wheel rim. When the bike tips over, the plastic steel block will rotate, thereby achieving the effect of reducing friction.

Product Color:
Black/Gold/Titanium

Product Material:
6061-T6 aluminum-magnesium alloy: 0.4%-0.8% silicon; 0.15%-0.4% copper, 0.8%-1.2% magnesium; 0.04%-0.35% chromium, tensile strength 42,000 psi (290 MPa), yield strength 35,000 psi (241 MPa), elongation of 8% or more for thicknesses less than 0.25 inches (6.4 mm), and 10% for thicknesses greater than 0.25 inches (6.4 mm)

Surface Treatment:
General Anodizing: Anodizing with the same specifications as iPhones and tablets, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours. (Fading begins only after 60 hours of continuous exposure to UV intensity of 100eV; natural sunlight UV intensity is about 3-10eV). Dacromet Rust-Proof Treatment: The fixing screws use top-tier rust-proof treatment - Dacromet, which is an anti-corrosion coating mainly composed of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet has a wide range of applications, and top-tier European car models use this rust-proof technology.

Installation Instructions:
1. Please first confirm the left and right orientation of the product according to the 3D diagram on the back of the product card.
2. Pass the aluminum alloy axle through the front wheel axle.
3. Then lock the sliders on both sides to complete the installation.

Notes:
If the plastic steel and components are damaged and unusable, they can be purchased separately without the need to buy the whole set again.

Applicable Models:
YAMAHA
T-MAX 500 08-11
T-MAX 530 12-15
Bronze Max 12-15
XP 500 08-11
XP 530 12-15

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes before ordering】
Before ordering, please double-check the color, size, and other information you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long wait for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other factors, it will not be processed; no charges will be incurred if the order is not finalized.
Please note that manufacturers may unilaterally change specifications or exterior designs, which may result in differences between the packaging or the product itself and the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing its intended function as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, so packaging may be deformed or damaged during transit, while the product itself remains intact and functional.
【Return Policy】
If you require return services, please apply via the returns section; please keep the product in its original condition and pack it in the original shipping box.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For returns due to non-human-induced defects, please apply within 7 days of receipt.
【Authenticity Guarantee】
For products with an authenticity guarantee, if they are found to be suspected counterfeits and confirmed by court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.