3D Front Fork Sliders for MT-09 (13-18)

．Applicable models: YAMAHA MT-09 (13-18)

Product Part Number:
DI-FASR-YA-05 (Aluminum Ring Model)
DI-FAS3D-YA-05 (Decorative Model)

Product Name:
Aluminum Ring Front Fork Sliders
3D Front Fork Sliders
If a heavy motorcycle unfortunately tips over, it often incurs huge repair costs, especially at high speeds. If an accident occurs and the vehicle body generates excessive friction with the ground, it can cause the vehicle to bounce off the ground, leading to flipping and greater damage. This is what is often referred to on the track as (LOW-SIDE to HIGH-SIDE, where a general sliding accident turns into a vehicle bouncing and rolling situation). The outer layer of DIMOTIV front fork sliders uses POM (polyoxymethylene) as the main material.

If a heavy motorcycle unfortunately tips over, it often incurs huge repair costs, especially at high speeds. If an accident occurs and the vehicle body generates excessive friction with the ground, it can cause the vehicle to bounce off the ground, leading to flipping and greater damage. This is what is often referred to on the track as (LOW-SIDE to HIGH-SIDE, where a general sliding accident turns into a vehicle bouncing and rolling situation). The outer layer of DIMOTIV front fork sliders uses POM (polyoxymethylene) as the main material, which has the following characteristics:
1. Shock Absorption: Absorbs impact force during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: A low friction coefficient effectively reduces the probability of the vehicle body bouncing or flipping due to excessive friction.
This product uses an aluminum alloy axle passing through the hollow front wheel axle, which does not affect the operation of the original swingarm and wheel rim. When the slider is impacted, the force is transmitted through the aluminum alloy axle to the other side, reducing the direct impact on the swingarm and wheel rim. During a tip-over, the POM block rotates, thereby achieving the effect of reducing friction.

Available Colors:
Black/Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%; Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%. Tensile strength 42,000 psi (290 MPa), yield strength 35,000 psi (241 MPa). Elongation is 8% or more for thicknesses under 0.25 inches (6.4 mm), and 10% for thicknesses over 0.25 inches (6.4 mm).

Surface Treatment:
Standard Anodizing: Anodizing to the same specifications as iPhones and tablets, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours. (Fading begins after 60 hours of continuous exposure to UV intensity of 100eV; natural sunlight UV intensity is approximately 3~10eV). Dacromet Rust Prevention: The fixing screws use top-tier Dacromet rust prevention, an anti-corrosion coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely applied and used by top European car models.

Installation Instructions:
1. Please confirm the left and right orientation of the product according to the 3D diagram on the back card.
2. Pass the aluminum alloy axle through the front wheel axle.
3. Lock the sliders on both sides to complete the installation.

Notes:
If the POM or components are damaged and unusable, they can be purchased separately without needing to buy the whole set again.

Applicable Models: YAMAHA MT-09 13-18

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before placing an order, please carefully confirm information such as the desired color and size.
Most products have lead times provided after the order is placed; therefore, some items may be discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or temporary unavailability, the order will not be processed, and no fees will be charged.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in the packaging or the product itself differing from the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing its intended function as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in the packaging or the product itself differing from the images on the product page.
【Return Policy】
If you require return services, please apply via the returns section; please keep the product in its original condition and packaged in its original box.
Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible.
For non-human-induced defects, please apply for a return within 7 days of receiving the product.
【Authenticity Guarantee】
For products guaranteed to be authentic, if any item is found to be a suspected counterfeit and is confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.