Aluminum Ring Front Fork Sliders for C600 SPORT (12-17) / C650GT (12-19)

．Applicable models: BMW C600 SPORT (12-17), C650GT (12-19)

Product Part Number:
DI-FASR-BM-06
DI-FAS3D-BM-06
Product Name:
Aluminum Ring Front Fork Sliders
If a large motorcycle unfortunately tips over, it often incurs high repair costs, especially at high speeds. If an accident occurs and the vehicle body generates excessive friction with the ground, it can cause the vehicle to bounce off the ground, leading to rollovers and greater damage. This is often referred to in racing as (LOW-SIDE to HIGH-SIDE, where a standard sliding crash turns into a bouncing and rolling situation). The outer layer of the DIMOTIV front fork sliders is made of engineering plastic (scientific name: Polyoxymethylene, abbreviated as POM) as the main material.

If a large motorcycle unfortunately tips over, it often incurs high repair costs, especially at high speeds. If an accident occurs and the vehicle body generates excessive friction with the ground, it can cause the vehicle to bounce off the ground, leading to rollovers and greater damage. This is often referred to in racing as (LOW-SIDE to HIGH-SIDE, where a standard sliding crash turns into a bouncing and rolling situation). The outer layer of the DIMOTIV front fork sliders is made of engineering plastic (scientific name: Polyoxymethylene, abbreviated as POM) as the main material, which has the following characteristics:
1. Shock absorption: Absorbs the impact force during a tip-over, effectively protecting the vehicle body.
2. High rigidity: Strong hardness and high wear resistance.
3. Low friction coefficient: A low friction coefficient can effectively reduce the probability of the vehicle body bouncing and rolling due to excessive friction.
This product uses an aluminum alloy rod that passes through the hollow front wheel axle, which does not affect the operation of the original swingarm and wheel rim. When the slider is impacted, the impact force is transmitted to the other end via the aluminum alloy rod, reducing the direct impact damage to the swingarm and wheel rim. During a tip-over, the engineering plastic block rotates, thereby reducing friction.

Product Colors: Black/Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%, Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). When plate thickness is less than 0.25 inches (6.4 mm), elongation is 8% or more. When thickness is greater than 0.25 inches (6.4 mm), elongation is 10%.

Surface Treatment:
General Anodizing: Anodizing with the same specifications as iPhones and tablets, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours. (Fading begins only after 60 hours of continuous exposure to UV intensity of 100eV; natural sunlight UV intensity is about 3~10eV). Dacromet Rust Prevention: The fixing screws use top-tier Dacromet rust prevention, a corrosion-resistant coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet is widely used and is utilized by top European car models for rust prevention technology.

Installation Instructions:
1. Please first confirm the left and right orientation of the product according to the 3D diagram on the back card.
2. Pass the aluminum alloy rod through the front wheel axle.
3. Lock the sliders on both sides to complete the installation.

Notes:
If the engineering plastic or components are damaged and unusable, they can be purchased separately without needing to buy the whole set again.

Applicable Models:
BMW
C600 SPORT 12-17
C650GT 12-19

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes before ordering】
Before ordering, please double-check the information such as the color and size you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long wait for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or other factors, the order will not be processed; no charges will be incurred if the order is not processed.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in differences between the packaging or the product itself and the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, while the product itself remains intact and functional.
【Return Policy】
If you require a return service, please apply via the returns section; please keep the product appearance intact and pack it in its original packaging.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For returns due to non-human-induced defects, please apply within 7 days of receiving the product.
【Authenticity Guarantee】
For products guaranteed to be authentic, if they are found to be suspected counterfeits and are proven as such through relevant litigation and final court judgment, we will compensate the customer 10 times the original purchase price.