Aluminum Ring Front Axle Sliders for CBR500R

-

Part Number: DI-FASR-HO-08
Product Name: Aluminum Ring Front Axle Sliders
Compatible Models: HONDA CB400F/400X 13-16, CB500F 13-21, CB500X 13-16, CBR400R 13-14, CBR500R 13-21

Product Introduction:
If a heavy motorcycle falls over, it often incurs significant repair costs. Especially at high speeds, if an accident occurs, excessive friction between the vehicle body and the ground can cause the bike to bounce, leading to flipping and greater damage—often referred to in racing as a transition from a low-side to a high-side. DIMOTIV front axle sliders feature an outer layer made of POM (Polyoxymethylene), which offers the following characteristics:
1. Shock Absorption: Absorbs impact force during a fall, effectively protecting the vehicle body.
2. High Rigidity: High hardness and excellent wear resistance.
3. Low Friction Coefficient: Reduces the probability of the vehicle body bouncing and flipping due to excessive friction.

This product uses a chromoly steel axle to replace the original front wheel axle, which does not affect the operation of the original swingarm or wheel rim. When the slider is impacted, the force is transmitted through the chromoly steel axle to the other side, reducing direct damage to the swingarm and rim. During a fall, the POM slider rotates to minimize friction.

Product Color: Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%; Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). Elongation is 8% or more for thicknesses under 0.25 inches (6.4mm), and 10% for thicknesses over 0.25 inches (6.4mm).
Chromoly Steel: A reinforced steel with high hardness and a high modulus of elasticity (Young's modulus 200-207), indicating excellent shock absorption properties.

Surface Treatment:
Standard Anodizing: Same specification as iPhone and tablet anodizing, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours (fading begins after 60 hours of continuous exposure to 100eV UV intensity; natural sunlight UV intensity is approximately 3-10eV).
Dacromet Anti-Rust Treatment: Fixing screws use premium Dacromet anti-rust treatment, a corrosion-resistant coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water.

Dacromet is widely applied and used by top European car manufacturers.

Installation Instructions:
1. Confirm the left and right sides according to the 3D diagram on the back of the packaging.
2. Lift the motorcycle using a paddock stand.
3. Remove the original front axle nut.
4. Remove the original wheel axle.
5. Insert the included chromoly steel axle.
6. Secure the sliders on both sides to complete the installation.

Notes:
If the POM slider or components are damaged, they can be purchased separately without needing to buy the entire set again.

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Pre-order Notice】
Before placing an order, please double-check the color, size, and other relevant information.
Most products have lead times provided after the order is placed, so there may be situations where items are discontinued or require a long waiting period for shipment.
Orders will not be processed if the manufacturer is out of stock or unable to supply the goods; no charges will be incurred if the order is not finalized.
Please be aware that manufacturers may unilaterally change specifications or exterior designs, which may result in differences between the packaging or the product itself and the images on the product page.
If a manufacturer's change in design or specifications prevents the product from performing as expected at the time of order, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, while the product itself remains intact and fully functional.
【Return Policy】
If you require return services, please apply via the returns section; ensure the product's appearance is maintained and it is sealed in its original packaging.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For non-human-induced defects, please apply for a return within 7 days of receipt.
【Authenticity Guarantee】
For products covered by our authenticity guarantee, if any item is found to be a suspected counterfeit and is confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.