Aluminum Ring Front Fork Slider for NINJA 250R (08-17) / NINJA 300 (13-17) / Z300 (15-18)

-

Product Part Number: DI-FASR-KA-04
Product Name: Aluminum Ring Front Fork Sliders

If a large motorcycle unfortunately tips over, it often incurs significant repair costs. Especially at high speeds, if an accident occurs and the bike generates excessive friction with the ground, it can cause the bike to bounce off the ground, leading to flipping and greater damage—often referred to in racing as a "low-side to high-side" transition (where a simple slide turns into a bouncing tumble). The DIMOTIV front fork slider outer layer uses POM (polyoxymethylene) as the main material, which has the following characteristics:
1. Shock Absorption: Absorbs impact force during a fall, effectively protecting the bike.
2. High Rigidity: Strong hardness and high wear resistance.
3. Low Friction Coefficient: Low friction coefficient effectively reduces the probability of the bike bouncing and flipping due to excessive friction.

This product uses a chromoly steel axle to replace the original front wheel axle, which does not affect the operation of the original swingarm or wheel rim. When the slider puck is impacted, the force is transmitted through the chromoly steel axle to the other side, reducing the direct impact force on the swingarm and wheel rim. The POM block rotates during a fall, thereby reducing friction.

Product Colors: Black/Gold/Titanium

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%; Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). For plate thickness less than 0.25 inches (6.4 mm), elongation is 8% or more. For thickness greater than 0.25 inches (6.4 mm), elongation is 10%.
Chromoly Steel: A reinforced steel with high hardness and high elasticity (Young's modulus 200-207). High elasticity indicates that the material has excellent impact absorption characteristics.

Surface Treatment:
Standard Anodizing: Anodizing process with the same specifications as iPhones and tablets, featuring corrosion resistance and UV resistance, with weather resistance lasting up to 60 hours. (Fading begins only after 60 hours of continuous exposure to UV intensity of 100eV; natural sunlight UV intensity is approximately 3~10eV).
Dacromet Anti-Rust Treatment: The mounting screws use top-tier Dacromet anti-rust treatment, a corrosion-resistant coating composed mainly of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet has a wide range of applications and is used by top European car manufacturers.

Installation Instructions:
1. Please check the 3D diagram on the back of the card to confirm the left and right orientation.
2. Use a paddock stand to lift the bike.
3. Remove the original front wheel axle nut.
4. Remove the original wheel axle.
5. Insert the included chromoly steel axle.
6. Lock the sliders on both sides to complete the installation.

Note:
If the POM or components are damaged beyond use, they can be purchased individually, so there is no need to buy the whole set again.

Compatible Models: ZX250R 08-17, ZX300R 13-17, Z300 15-18

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before ordering, please carefully confirm the color, size, and other information you wish to purchase.
Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long waiting period for shipment.
If an order cannot be fulfilled due to manufacturer stock shortages or temporary unavailability, the order will not be processed; no fees will be charged if the order is not established.
Please note that manufacturers may unilaterally change specifications or exterior designs, which may result in differences between the packaging or the product itself and the images on the product page.
If a manufacturer's unilateral change in design or specifications prevents the product from performing its intended function, please consult our customer service for further assistance.
Products undergo multiple shipping processes from order to delivery, which may result in deformation or damage to the packaging, while the product itself remains intact and functional.
【Return Policy】
If you require a return service, please apply via the returns section; please keep the product appearance intact and seal it in its original packaging.
Upon receiving your return request, we will dispatch a logistics provider to collect the item as soon as possible.
For non-human-induced defects, please apply for a return within 7 days of receiving the product.
【Authenticity Guarantee】
For products guaranteed to be authentic, if they are found to be suspected counterfeits and confirmed by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.