Aluminum Ring Front Axle Slider for YZF-R1 / T-MAX 530

-

Part Number: DI-FASR-YA-03

Product Name:
3D Rear Swingarm Slider

Product Description:
If a large motorcycle is unfortunately tipped over, it often requires expensive repair costs. Especially at high speeds, if an accident occurs, the excessive friction between the vehicle body and the ground can cause the vehicle to bounce off the ground, leading to flipping and greater damage. This is what is often referred to on the track as (LOW-SIDE → HIGH-SIDE, where a general sliding accident turns into a vehicle bouncing and rolling situation). The DIMOTIV rear wheel slider outer layer uses plastic steel (scientific name: polyoxymethylene, abbreviated as POM) as the main material, which has the following characteristics:
1. Shock Absorption: Can absorb the impact force during a tip-over, effectively protecting the vehicle body.
2. High Rigidity: Strong hardness, high wear resistance.
3. Low Friction Coefficient: A low friction coefficient can effectively reduce the probability of the vehicle body bouncing and flipping due to excessive friction.
This product uses an aluminum alloy tensioner to fix it to the rear swingarm, completely without affecting the operation of the factory swingarm and wheel rim. The exquisitely carved plastic steel cover, in addition to its protective properties, can also enhance the overall visual effect of your bike.

Product Material:
6061-T6 Aluminum-Magnesium Alloy: Silicon content 0.4%~0.8%; Copper content 0.15%~0.4%, Magnesium content 0.8%~1.2%; Chromium content 0.04%~0.35%, Tensile strength 42,000 psi (290 MPa), Yield strength 35,000 psi (241 MPa). When plate thickness is less than 0.25 inches (6.4 mm), elongation is 8% or more. When thickness is greater than 0.25 inches (6.4 mm), elongation is 10%.

Surface Treatment:
Standard Anodizing: Anodizing to the same specifications as iPhones and tablets, featuring corrosion resistance, UV resistance, and weather resistance for up to 60 hours. (Fading begins only after 60 hours of continuous exposure to 100eV UV intensity; natural sunlight UV intensity is approximately 3–10eV). Dacromet Anti-rust Treatment: Fixing bolts use premium anti-rust treatment - Dacromet, an anti-corrosion coating primarily composed of zinc powder, aluminum powder, chromic acid, and deionized water. Dacromet has a wide range of applications, and top-tier European vehicle models use this anti-rust technology.

Installation Instructions:
1. Pass the fixing bolt through the slider body and plastic steel cover, then combine with the aluminum alloy tensioner.
2. Remove the factory rear swingarm plastic cover.
3. Insert this product into the hole and use tools to tighten it to complete installation.

Notes:
If the plastic steel or components are damaged and unusable, they can be purchased individually without needing to buy the whole set again.

Compatible Models:
YAMAHA
YZF-R1 09-14
TMAX530(Bronze Max) 15-16

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

【Notes Before Ordering】
Before placing an order, please carefully confirm the color, size, and other relevant information. Most products have lead times provided after the order is placed, so there may be situations where products are discontinued or require a long waiting period for shipment. If an order cannot be fulfilled due to manufacturer stock shortages or temporary unavailability, the order will not be processed, and no fees will be charged. Please note that manufacturers may unilaterally change specifications or designs, which may result in differences between the packaging or the product itself and the images shown on the product page. If a manufacturer's design or specification change prevents the product from functioning as expected at the time of order, please contact our customer service for further assistance. As products undergo multiple shipping processes from order to delivery, packaging may occasionally be deformed or damaged, even if the product itself remains intact and fully functional.
【Return Policy】
If you require a return service, please apply through the returns section; ensure the product's appearance is maintained and it is sealed in its original packaging. Upon receiving your return request, we will arrange for a logistics provider to collect the item as soon as possible. Please apply for returns due to non-human-induced defects within 7 days of receipt.
【Authenticity Guarantee】
For products covered by our authenticity guarantee, if any item is found to be a suspected counterfeit and is confirmed as such by a court judgment following relevant litigation, we will compensate the customer 10 times the original purchase price.