3M Carbon Fiber Vinyl Wrap DRG 2nd Gen Front Shield Emblem

-

New templates developed on the actual 2024 DRGBT 2nd Gen! Film for additional areas is continually being added!

Important notes:
Some factory matte-painted areas have poor paint adhesion. Repeatedly applying and removing film may lift the paint. Please consider this before purchasing!
Some strongly curved areas may require a heat gun or hair dryer to help the film conform properly.
Too much foam in the application solution can become trapped under the film and be difficult to squeegee out completely. Avoid adding too much dish soap or liquid soap to greatly improve your chances of a successful installation!
If this is your first DIY film installation, consider your skills and patience carefully! Watch our installation videos or consult customer service first. If you are not confident, leave it to a professional! The film quality is reliable; problems usually come from improper installation!
Concerned about lifting edges? Apply our optional 3M high-performance adhesion promoter along the edges of the application surface before pressing down the film. Let it dry for a few seconds to improve adhesion! (Avoid transparent parts such as instrument covers! Apply only along the edges.)
Some strongly curved areas use several separate pieces to make DIY installation easier. Gaps between pieces are normal, not defects! Please do not order if you require a seamless finish!

Prevent everyday scratches and malicious damage when your vehicle is parked outside.
Carefully selected world-leading, supercar-grade 3M Pro 4.0 paint protection film.

*Premium 3M Pro 4.0 protective film
The sole designated paint protection film brand for 99.9% of the world's automotive manufacturing and aerospace industries.
The only film certified for impact resistance at 300KM/hour.
Imported genuine American-made film, not inferior products manufactured in China.
The world's highest-grade protective film.
3M offers a five-year warranty in Taiwan against yellowing, cracking, and bubbling!
Premium TPU film up to 8mil thick, with a 5-times-thicker anti-yellowing, anti-aging coating. Thick yet clear, it far outperforms ordinary PU/PVC film and resists tearing.
UV-resistant coating up to 0.95mil thick offers industry-leading resistance to yellowing and stains!
Self-healing surface technology quickly repairs fine scratches and restores your vehicle's shine.
The nanoscale coating effectively blocks air, moisture, rain, sunlight, insect residue, bird droppings, and other contaminants, while protecting against 80% of road stone impacts.

Use the wet application method.
Clean the application surface thoroughly before installation to prevent dust from becoming trapped under the film. (Cleaning solvent may be used if necessary, but check that it is safe for the vehicle's surface material first.)
Use neutral dish soap or soapy water at a ratio of approximately 2~3:1000 (1000ml water + 2~3C.C dish soap or liquid soap). Excess foam will make it difficult to squeegee out completely.
If you did not purchase a silicone squeegee, an unused membership card or credit card can be used instead.
After installation, gently heat the film with a household hair dryer while using a squeegee to help it conform.
Any remaining moisture may disappear after 1-2 weeks. Avoid washing your vehicle during this period.
*When replacing the film, warm its surface with a hair dryer or heat gun before peeling it off to reduce adhesive residue!

*Premium 3M 4D textured carbon fiber film (Simply clean the surface with water before application.)
Understated yet distinctive, with excellent outdoor weather resistance.
Use the dry application method to avoid air bubbles.
3.5mm cast film conforms well and resists edge lifting.
Micro air channels, glass beads, and pressure-sensitive adhesive allow easy sliding alignment while minimizing bubbles.

Use the dry application method.
Clean the application surface thoroughly and make sure it is dry before applying the film, as moisture can reduce adhesion.
After installation, warm the film edges with a hair dryer to help them conform.
Avoid overstretching the carbon fiber film, as this may cause tearing.
Avoid washing the vehicle for 1-2 weeks after application, and do not direct a water jet at the carbon fiber film.

※The vehicle model may have different specifications in different regions and may not be compatible for installation.

[Before Ordering]
Please carefully confirm the color, size, and other details before placing your order.
Delivery times for most items are confirmed after the order is placed, so some items may be discontinued or may take a long time to ship.
If the manufacturer is out of stock or temporarily unable to deliver, the order will not be placed; no charges will be made for orders that are not placed.
Manufacturers may change specifications or designs without notice, so the packaging or the product itself may differ from the images on the product page. Thank you for your understanding.
If a manufacturer's change in design or specifications prevents the product from performing as expected at the time of order, please contact our customer service for assistance.
Items pass through several shipping stages from order to delivery, so the packaging may be deformed or damaged in transit while the product itself remains intact and fully usable.
[Returns]
To return an item, please submit a request in the Returns section, and keep the product and its original packaging in good condition.
Once we receive your return request, we will arrange for a courier to collect the item as soon as possible.
For returns of defective items not caused by the customer, please submit your request within 7 days of receiving the item.
[Authenticity Guarantee]
For products covered by our authenticity guarantee, if an item is found to be counterfeit and this is confirmed by a court ruling after legal proceedings, customers who purchased it will be compensated 10 times the original purchase price.